B0001 Ford Code - Driver Frontal Stage 1 Deployment Control
Quick Answer
The Restraints Control Module (RCM) monitors all deployable device and sensor circuits for a signal cross coupled (short) between circuits. Common causes include Faulty Driver Side Air Bag, Driver Side Air Bag harness is open or shorted, Driver Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0001 Ford indicates Driver Frontal Stage 1 Deployment Control.
- Common causes
- Common causes include Faulty Driver Side Air Bag, Driver Side Air Bag harness is open or shorted, Driver Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0001 Ford Description
What are the Possible Causes of the DTC B0001 Ford?
- Faulty Driver Side Air Bag
- Driver Side Air Bag harness is open or shorted
- Driver Side Air Bag circuit poor electrical connection
- Faulty Clockspring
- Faulty Restraints Control Module (RCM)
How to Fix the DTC B0001 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0001:12 Driver Frontal Stage 1 Deployment Control: Circuit Short to Battery
B0001:13 Driver Frontal Stage 1 Deployment Control: Circuit Open
B0001:1A Driver Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0001 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0001 Ford code?
Need more information on how to fix the B0001 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0001 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0001 Ford Code
1. What are the common symptoms of OBDII code B0001 Ford related to Driver Frontal Stage 1 Deployment Control?
- Common symptoms include the airbag warning light illuminating on the dashboard and possible non-deployment of the driver's frontal airbag during a collision.
2. What are the possible causes of OBDII code B0001 Ford?
- The code may be triggered by issues with the driver frontal airbag module, faulty wiring connections, or a malfunction in the airbag control module.
3. How serious is OBDII code B0001 Ford?
- This code is serious as it relates to the deployment of the driver's frontal airbag, which is a critical safety feature in the event of a collision. It is important to address this issue promptly.
4. Can I continue driving with OBDII code B0001 Ford present?
- It is not recommended to continue driving with this code present, as it may indicate a potential safety risk if the driver's frontal airbag does not deploy correctly during an accident.
5. How can I diagnose and repair OBDII code B0001 Ford?
- Diagnosis typically involves using a diagnostic scanner to retrieve the specific information related to the code. Repair may involve inspecting and repairing wiring connections, replacing the driver frontal airbag module, or addressing issues with the airbag control module.
6. Is it safe to reset the OBDII code B0001 Ford without addressing the underlying issue?
- It is not safe to simply reset the code without addressing the underlying problem, as it may compromise the functionality of the driver's frontal airbag, putting you at risk in the event of a collision.
7. Are there any DIY tips for troubleshooting OBDII code B0001 Ford?
- DIY tips may include checking for loose or damaged wiring connections related to the driver frontal airbag system and ensuring all connections are secure and free of corrosion.
8. How much does it typically cost to repair OBDII code B0001 Ford at a dealership or repair shop?
- Repair costs can vary depending on the specific issue causing the code, but it is recommended to consult with a dealership or repair shop for an accurate estimate based on your vehicle's make and model.
9. Can OBDII code B0001 Ford affect other airbag systems in the vehicle?
- While the code specifically relates to the driver frontal airbag system, it is possible that issues with this system may impact the overall functionality of the vehicle's airbag system. It is essential to address the problem promptly.
10. How often should I have the driver frontal airbag system inspected to prevent OBDII code B0001 Ford from occurring?
- It is recommended to have the airbag system inspected as part of regular vehicle maintenance and to address any warning lights or unusual symptoms promptly to prevent potential issues related to OBDII code B0001 Ford.
Discuss the causes and fixes for B0001 Ford OBDII Code
-
I put new search covers on my 13 f350 super duty but when I tightened the straps it did something to the driver side airbag now its lit on the on the display
-
Do you have any other codes besides the B0001? The B0001 code is for the driver front air bag and has nothing to do with the seat.
-
2013 F-250 I have the B0001:13 circuit open code. Where should I start troubleshooting, thank you
-
Was your F250 in an accident? or did you perform a wheel alignment?
According to a National Database of repairs for your model and year the most probable cause for the B0001:13 is a faulty clockspring.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
