C279A Ford Code - Invalid Brake Pressure Transducer Pressure Input Received
Quick Answer
The Brake Pressure Transducer is attached to the brake master cylinder and is hardwired to the Trailer Brake Control (TBC) Module. Common causes include Faulty Brake Pressure Transducer, Brake Pressure Transducer harness is open or shorted, Brake Pressure Transducer circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C279A Ford indicates Invalid Brake Pressure Transducer Pressure Input Received.
- Common causes
- Common causes include Faulty Brake Pressure Transducer, Brake Pressure Transducer harness is open or shorted, Brake Pressure Transducer circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C279A Ford Description
What are the Possible Causes of the DTC C279A Ford?
- Faulty Brake Pressure Transducer
- Brake Pressure Transducer harness is open or shorted
- Brake Pressure Transducer circuit poor electrical connection
- Faulty Trailer Brake Control (TBC) Module
How to Fix the DTC C279A Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C279A Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C279A Ford code?
Need more information on how to fix the C279A Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C279A Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C279A Ford Code
1. What are the common symptoms of OBDII code C279A in a Ford vehicle?
- Common symptoms include the brake warning light illuminating on the dashboard, inconsistent brake performance, and potential ABS system malfunctions.
2. What does the OBDII code C279A Ford "Invalid Brake Pressure Transducer Pressure Input Received" mean?
- This code indicates that the brake pressure transducer is sending an invalid signal to the vehicle's electronic control unit (ECU).
3. What are the possible causes of OBDII code C279A in a Ford vehicle?
- The code C279A can be triggered by issues such as a faulty brake pressure transducer, damaged wiring or connectors in the brake system, or a malfunctioning ECU.
4. How can I diagnose the cause of OBDII code C279A in my Ford vehicle?
- Diagnosis typically involves checking the brake pressure transducer for proper operation, inspecting the wiring and connectors for any damage, and conducting a thorough scan of the ABS system using a diagnostic tool.
5. What are some DIY repair tips for addressing OBDII code C279A in a Ford vehicle?
- DIY enthusiasts can start by checking the brake fluid level, ensuring all connections are secure, and clearing the code to see if it reappears. If the issue persists, professional diagnosis and repair may be necessary.
6. Is it safe to drive with OBDII code C279A illuminated in a Ford vehicle?
- It is not recommended to drive with this code illuminated, as it may indicate potential brake system malfunctions that could compromise vehicle safety.
7. Can resetting the OBDII code C279A in a Ford vehicle fix the issue permanently?
- Resetting the code may temporarily turn off the warning light, but if the underlying issue causing the code is not addressed, it is likely to reoccur.
8. How much does it cost to repair OBDII code C279A in a Ford vehicle?
- Repair costs can vary depending on the specific cause of the code, but they may range from a simple connector repair to a more complex brake pressure transducer replacement, potentially costing a few hundred dollars.
9. Will OBDII code C279A in a Ford vehicle pass a state emissions inspection?
- Any illuminated warning light, including OBDII code C279A, may cause a vehicle to fail an emissions inspection in states where such inspections are required.
10. How can I prevent OBDII code C279A from reoccurring in my Ford vehicle?
- Regular maintenance of the brake system, including checking fluid levels and ensuring proper component operation, can help prevent the recurrence of code C279A.
Discuss the causes and fixes for C279A Ford OBDII Code
Code C279A Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
