C2778 Mercury Code - Sensor Power Supply Failure
Quick Answer
The yaw rate sensor, roll rate sensor, lateral accelerometer and longitudinal accelerometer are contained in one module called the stability control sensor cluster. Common causes include Faulty Stability Control Sensor Cluster, Stability Control Sensor Cluster harness is open or shorted, Stability Control Sensor Cluster circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2778 Mercury indicates Sensor Power Supply Failure.
- Common causes
- Common causes include Faulty Stability Control Sensor Cluster, Stability Control Sensor Cluster harness is open or shorted, Stability Control Sensor Cluster circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2778 Mercury Description
The ABS module provides power to the sensor cluster and ground. The sensor cluster and the ABS module communicate. An open circuit or a short to power or ground on any one of these 4 circuits will cause the ABS module to set a DTC. Also, if the sensor cluster is not mounted in the correct position, with the electrical connector facing the passenger seat, the ABS module will also set DTCs.
What are the Possible Causes of the DTC C2778 Mercury?
- Faulty Stability Control Sensor Cluster
- Stability Control Sensor Cluster harness is open or shorted
- Stability Control Sensor Cluster circuit poor electrical connection
How to Fix the DTC C2778 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2778 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2778 Mercury code?
Need more information on how to fix the C2778 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2778 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2778 Mercury Code
1. What are the common symptoms of OBDII code C2778 (Mercury) - Sensor Power Supply Failure?
- Common symptoms include rough idling, loss of power, poor fuel efficiency, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code C2778 (Mercury) - Sensor Power Supply Failure?
- Possible causes include a faulty sensor, damaged wiring or connectors, a blown fuse, or issues with the power supply circuit.
3. How can I diagnose the Sensor Power Supply Failure related to OBDII code C2778 (Mercury)?
- Use a diagnostic scanner to retrieve the trouble codes, inspect the sensor connections, check for damaged wiring, and test the power supply circuit.
4. Can I still drive my Mercury with OBDII code C2778 (Sensor Power Supply Failure) activated?
- It is not recommended to drive with this code active, as it can lead to poor engine performance and potential damage if left unresolved.
5. How do I repair OBDII code C2778 (Mercury) - Sensor Power Supply Failure?
- Repair options include replacing the faulty sensor, repairing damaged wiring or connectors, checking and replacing blown fuses, and ensuring a stable power supply.
6. Is it safe to reset the OBDII code C2778 (Mercury) - Sensor Power Supply Failure without fixing the underlying issue?
- It is not recommended to reset the code without addressing the root cause, as the problem may persist and lead to further complications.
7. Can a DIY enthusiast fix OBDII code C2778 (Mercury) - Sensor Power Supply Failure?
- Depending on the level of expertise, a DIY enthusiast may be able to address this issue by following repair guides, but professional assistance is advised for accurate diagnosis and repair.
8. Are there any preventive measures to avoid OBDII code C2778 (Mercury) - Sensor Power Supply Failure?
- Regular maintenance, such as checking sensor connections, inspecting wiring, and ensuring a clean power supply, can help prevent issues leading to this trouble code.
9. How much does it typically cost to repair OBDII code C2778 (Mercury) - Sensor Power Supply Failure?
- The cost of repair can vary depending on the extent of the issue, the parts needed, and whether professional labor is required. It is advisable to obtain quotes from auto repair shops.
10. Will OBDII code C2778 (Mercury) - Sensor Power Supply Failure cause permanent damage if not addressed promptly?
- Ignoring this code can potentially cause further damage to the engine or related components, so prompt diagnosis and repair are recommended to prevent costly repairs down the line.
Discuss the causes and fixes for C2778 Mercury OBDII Code
Code C2778 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
