C2511 Code - Torque Sensor 1 Failure
Quick Answer
The Electric Power Steering Control Module monitors the Torque Sensor 1. Common causes include Faulty Torque Sensor 1, Torque Sensor 1 harness is open or shorted, Torque Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2511 indicates Torque Sensor 1 Failure.
- Common causes
- Common causes include Faulty Torque Sensor 1, Torque Sensor 1 harness is open or shorted, Torque Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2511 Description
What are the Possible Causes of the DTC C2511?
- Faulty Torque Sensor 1
- Torque Sensor 1 harness is open or shorted
- Torque Sensor 1 circuit poor electrical connection
- Faulty Electric Power Steering Control Module
How to Fix the DTC C2511?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2511 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2511 code?
Need more information on how to fix the C2511 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2511 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C2511 Subaru — Torque Sensor 1 Failure
Frequently Asked Questions about C2511 Code
1. What are the common symptoms of OBDII code C2511 (Torque Sensor 1 Failure)?
- Common symptoms include issues with the power steering system, such as stiff or unresponsive steering, steering wheel vibrations, and warning lights on the dashboard.
2. What can cause the OBDII code C2511 to trigger?
- The code C2511 can be triggered by a malfunction or failure in the torque sensor 1 within the power steering system, often due to sensor damage, wiring issues, or a faulty sensor circuit.
3. How can I diagnose a torque sensor 1 failure related to OBDII code C2511?
- Diagnosing the torque sensor 1 failure typically involves using a diagnostic scanner to retrieve the trouble codes, conducting a visual inspection of the sensor and its wiring, and performing sensor tests to identify the issue.
4. Is it safe to drive with the OBDII code C2511 active?
- It is not recommended to drive with the OBDII code C2511 active, as it can lead to unpredictable steering behavior and potential safety hazards. It's best to address the issue promptly.
5. What are some repair tips for fixing OBDII code C2511 (Torque Sensor 1 Failure)?
- Repair tips include checking and repairing any damaged wiring, replacing the torque sensor 1 if necessary, ensuring proper sensor calibration, and clearing the trouble codes to reset the system.
6. Can a DIY enthusiast address the OBDII code C2511 issue?
- While some DIY enthusiasts may have the skills to diagnose and repair the torque sensor 1 failure, it is recommended to consult a professional technician for accurate diagnosis and proper repair to ensure the safety and reliability of the power steering system.
7. How much does it cost to repair OBDII code C2511 (Torque Sensor 1 Failure)?
- The cost of repairing OBDII code C2511 can vary depending on the extent of the damage, the labor rates in your area, and the cost of replacement parts. It's best to get a few quotes from reputable mechanics to determine the cost.
8. Are there any preventive measures to avoid OBDII code C2511 (Torque Sensor 1 Failure)?
- Regular maintenance of the power steering system, such as checking for leaks, keeping the system properly lubricated, and addressing any unusual steering behavior promptly, can help prevent torque sensor 1 failures that trigger the OBDII code C2511.
Discuss the causes and fixes for C2511 OBDII Code
Code C2511 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
