AutoCodes – Dodge – C2508 Dodge

C2508 Dodge Code - Engine Max Torque

Quick Answer

The Drivetrain Control Module (DTCM) monitors the Engine Max Torque Signal. Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module (PCM) harness is open or shorted, Powertrain Control Module (PCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2508 Dodge indicates Engine Max Torque.
Common causes: Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module (PCM) harness is open or shorted, Powertrain Control Module (PCM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 691

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2508 Dodge Description

The Drivetrain Control Module (DTCM) monitors the Engine Max Torque Signal. The DTCM sets the OBDII code when the Engine Max Torque Signal is not to factory specifications.

OBDII Code C2508 Dodge - Engine Max Torque - AutoCodes.com — C2508 Dodge Code - Engine Max Torque

What does this mean?

What are the Possible Causes of the DTC C2508 Dodge?

Faulty Powertrain Control Module (PCM)
Powertrain Control Module (PCM) harness is open or shorted
Powertrain Control Module (PCM) circuit poor electrical connection

How to Fix the DTC C2508 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2508 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2508 Dodge code?

Need more information on how to fix the C2508 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2508 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2508 Dodge Code

1. What are the common symptoms of OBDII code C2508 in a Dodge related to Engine Max Torque?

The common symptoms include reduced engine power, hesitation during acceleration, and possible stalling of the vehicle.

2. What could be the possible causes of OBDII code C2508 in a Dodge indicating Engine Max Torque issues?

Possible causes may include a malfunctioning torque calculation module, issues with sensors related to torque measurement, or a faulty wiring connection.

3. How can I diagnose the OBDII code C2508 in my Dodge to pinpoint the Engine Max Torque problem?

Diagnosis typically involves using an OBDII scanner to retrieve the specific code, checking the torque calculation module and related sensors for any faults, and inspecting the wiring for any damage or corrosion.

4. Can I continue driving my Dodge with the OBDII code C2508 related to Engine Max Torque without getting it repaired immediately?

It is not recommended to continue driving the vehicle with this code present, as it can lead to further damage and potentially unsafe driving conditions due to the reduced engine power.

5. Is it possible to reset the OBDII code C2508 in a Dodge indicating Engine Max Torque issues without fixing the underlying problem?

While you can reset the code using an OBDII scanner, it will likely reappear until the underlying issue is diagnosed and repaired.

6. What are some repair tips for addressing OBDII code C2508 in a Dodge related to Engine Max Torque?

Repair tips may include checking and cleaning sensor connections, inspecting and repairing damaged wiring, and replacing the torque calculation module if necessary.

7. How much does it typically cost to repair OBDII code C2508 in a Dodge related to Engine Max Torque?

The cost of repair can vary depending on the specific issue causing the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Can a DIY enthusiast with some automotive knowledge fix OBDII code C2508 in a Dodge indicating Engine Max Torque problems?

Depending on the exact cause of the code, some DIY enthusiasts may be able to address the issue themselves by following diagnostic procedures and repair guides. However, certain repairs may require professional expertise.

9. Will fixing OBDII code C2508 in a Dodge related to Engine Max Torque improve the vehicle's performance and fuel efficiency?

Yes, resolving the underlying issue causing the code can help restore the engine's full performance capabilities and potentially improve fuel efficiency as well.

10. How often does OBDII code C2508 related to Engine Max Torque occur in Dodge vehicles, and is it a common issue?

The occurrence of this specific code can vary among Dodge vehicles, but it is not considered as common as some other OBDII codes. However, when it does occur, it should be addressed promptly to prevent further complications.