AutoCodes – Jeep – C2507 Jeep

C2507 Jeep Code - Engine Torque Driver Require Signal Plausibility Failure

Quick Answer

The Drivetrain Control Module (DTCM) monitors the Engine Torque Driver Require Signal. Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module (PCM) harness is open or shorted, Powertrain Control Module (PCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2507 Jeep indicates Engine Torque Driver Require Signal Plausibility Failure.
Common causes: Common causes include Faulty Powertrain Control Module (PCM), Powertrain Control Module (PCM) harness is open or shorted, Powertrain Control Module (PCM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 858

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2507 Jeep Description

The Drivetrain Control Module (DTCM) monitors the Engine Torque Driver Require Signal. The DTCM sets the OBDII code when the Engine Torque Driver Require Signal is not to factory specifications.

OBDII Code C2507 Jeep - Engine Torque Driver Require Signal Plausibility Failure - AutoCodes.com — C2507 Jeep Code - Engine Torque Driver Require Signal Plausibility Failure

What does this mean?

What are the Possible Causes of the DTC C2507 Jeep?

Faulty Powertrain Control Module (PCM)
Powertrain Control Module (PCM) harness is open or shorted
Powertrain Control Module (PCM) circuit poor electrical connection

How to Fix the DTC C2507 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2507 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2507 Jeep code?

Need more information on how to fix the C2507 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2507 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2507 Jeep Code

1. What does the OBDII code C2507 mean on a Jeep?

C2507 indicates an "Engine Torque Driver Require Signal Plausibility Failure," meaning the engine control module (ECM) has detected an issue with the torque request signal's validity or plausibility.

2. What are the common symptoms of the C2507 code on a Jeep?

Common symptoms include reduced engine performance, activation of limp mode, abnormal transmission shifting, or the illumination of the check engine light.

3. What causes the C2507 code on a Jeep?

Possible causes include a faulty engine control module (ECM), damaged wiring or connectors in the torque signal circuit, a malfunctioning throttle body, or software errors.

4. Can a faulty throttle body cause the C2507 code?

Yes, a malfunctioning throttle body can cause irregular torque signals, triggering the C2507 code.

5. How do I diagnose the C2507 code on my Jeep?

Diagnose the code by checking for related trouble codes, inspecting the wiring and connectors for damage, testing the throttle body, and verifying ECM functionality with a scan tool.

6. Can I drive my Jeep with the C2507 code active?

Driving with this code is not recommended, as it can lead to reduced performance and potential transmission issues. You should address the issue promptly.

7. How can I fix the C2507 code on my Jeep?

Repairs may include checking and repairing damaged wiring, replacing the throttle body, reprogramming or updating the ECM, or replacing the ECM if necessary.

8. Does the C2507 code require ECM replacement?

Not always. ECM replacement is only necessary if all other potential issues, such as wiring or sensor faults, have been ruled out and the ECM is confirmed to be defective.

9. How much does it cost to repair the C2507 code on a Jeep?

Repair costs vary depending on the cause. Wiring repairs may cost $100-$300, while throttle body replacement can range from $200-$600. ECM replacement may cost upwards of $1,000, including programming.

10. Can software updates fix the C2507 code on a Jeep?

In some cases, a software update may resolve torque signal plausibility issues. Consult your dealership to determine if an update is available for your vehicle.