AutoCodes – Generic – C2415

C2415 Code - Motor Current Insufficient Flow

Quick Answer

An operating motor is used to support the driving force of steering wheel when the wheel is turned (rotated) by the driver. Common causes include Faulty Electronic Power Steering (EPS) Motor, Electronic Power Steering (EPS) Motor harness is open or shorted, Electronic Power Steering (EPS) Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2415 indicates Motor Current Insufficient Flow.
Common causes: Common causes include Faulty Electronic Power Steering (EPS) Motor, Electronic Power Steering (EPS) Motor harness is open or shorted, Electronic Power Steering (EPS) Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,774

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2415 Description

An operating motor is used to support the driving force of steering wheel when the wheel is turned (rotated) by the driver. The operating motor (a brush type DC motor) is installed in the middle of the steering column and operates the steering column. The Electronic Power Steering (EPS) Motor can be damaged during disassembly or removal of the operating motor, so you must disassemble or remove the EPS motor with the assembly. This Diagnostic Trouble Code (DTC) code refers to failure or insufficient current, in motor, during EPS Control Module control of the motor. This code is set if current under 2A is detected, in the motor, due to open/short of EPS motor control harness, faulty contact or short in motor inside.

OBDII Code C2415 - Motor Current Insufficient Flow - AutoCodes.com — C2415 Code - Motor Current Insufficient Flow

What does this mean?

What are the Possible Causes of the DTC C2415?

Faulty Electronic Power Steering (EPS) Motor
Electronic Power Steering (EPS) Motor harness is open or shorted
Electronic Power Steering (EPS) Motor circuit poor electrical connection
Faulty Electronic Power Steering (EPS) Control Module

How to Fix the DTC C2415?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2415 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2415 code?

Need more information on how to fix the C2415 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2415 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C2415 Hyundai — Motor Current Insufficient Flow
C2415 KIA — Motor Current Insufficient Flow

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2415 Code

1. What are the common symptoms of OBDII code C2415, Motor Current Insufficient Flow?

- Common symptoms include poor engine performance, rough idling, and difficulty accelerating.

2. What are some possible causes of OBDII code C2415?

- Possible causes include a faulty motor, damaged wiring harness, or issues with the electronic control unit (ECU).

3. How can I diagnose the issue related to OBDII code C2415?

- You can use a diagnostic scanner to retrieve the code and then test the motor, wiring, and ECU for proper functionality.

4. What are the recommended repair tips for fixing OBDII code C2415?

- Check and repair any damaged wiring, replace the faulty motor if necessary, and reset the ECU to clear the code.

5. Can OBDII code C2415 cause serious damage to my vehicle?

- While the code itself may not cause immediate damage, ignoring the underlying issue can lead to further engine problems over time.

6. How much does it typically cost to repair OBDII code C2415?

- The cost of repair can vary depending on the extent of the damage and the specific components that need to be replaced. It is recommended to consult a professional mechanic for an accurate estimate.

7. Will OBDII code C2415 cause my vehicle to fail an emissions test?

- Yes, if the issue is not resolved, it can lead to increased emissions and potentially cause your vehicle to fail an emissions test.

8. Can I continue driving my vehicle with OBDII code C2415?

- It is not recommended to drive your vehicle with this code as it can lead to poor performance and potential engine damage if left unaddressed.

9. How can I prevent OBDII code C2415 from appearing again in the future?

- Regular maintenance, such as checking and replacing worn-out components, can help prevent the recurrence of this code.

10. Is it possible to reset OBDII code C2415 without fixing the underlying issue?

- While you can clear the code temporarily, it will likely reappear if the root cause of the problem is not addressed. It is best to fix the issue to prevent further complications.