AutoCodes – Toyota – C2182 2013 Toyota RAV4

C2182 2013 Toyota RAV4 Code - Transmitter ID 2 Not Received

Quick Answer

The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2182 2013 Toyota RAV4 indicates Transmitter ID 2 Not Received.
Common causes: Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 288

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2182 2013 Toyota RAV4 Description

The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the Tire Pressure Warning ECU and Receiver in the vehicle as radio waves. The ECU compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the warning light in the combination meter assembly illuminates.
The Tire Pressure Warning Valve and Transmitters constantly send radio waves to the Tire Pressure Warning ECU and Receiver.
Under the conditions below, the Tire Pressure Warning ECU and Receiver is unable to receive the signals from the Tire Pressure Warning Valve and Transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire, wheel, and/or transmitter from a different vehicle is installed.

OBDII Code C2182 2013 Toyota RAV4 - Transmitter ID 2 Not Received - AutoCodes.com — C2182 2013 Toyota RAV4 Code - Transmitter ID 2 Not Received

What does this mean?

What are the Possible Causes of the DTC C2182 2013 Toyota RAV4?

Faulty Tire Pressure Warning Valve and Transmitter
Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2182 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2182 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2182 2013 Toyota RAV4 code?

Need more information on how to fix the C2182 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2182 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2182 2013 Toyota RAV4 Code

What does the OBDII code C2182 mean on a 2013 Toyota RAV4?

C2182 indicates that the vehicle's Tire Pressure Monitoring System (TPMS) has not received a signal from the tire pressure transmitter ID 2.

What are the symptoms of OBDII code C2182?

Common symptoms include an illuminated TPMS warning light on the dashboard and a possible inability to monitor the pressure of a specific tire.

What causes the C2182 code to appear?

Causes include a malfunctioning tire pressure sensor, a dead sensor battery, interference with the TPMS signal, or incorrect sensor ID programming.

Can I drive my 2013 Toyota RAV4 with the C2182 code?

Yes, but it is not recommended as the TPMS may not function correctly, potentially leading to undetected tire pressure issues.

How can I diagnose the C2182 code?

Use a TPMS scan tool to verify if the tire pressure sensor for ID 2 is transmitting data and check for any issues with the sensor or system programming.

How do I fix the C2182 code on my 2013 Toyota RAV4?

Replace the faulty tire pressure sensor, ensure the new sensor is properly programmed, and clear the code with a scan tool.

How much does it cost to repair a C2182 code?

Repair costs range from $50 to $150 for a new tire pressure sensor, plus labor costs if you have a professional perform the replacement and programming.

Can harsh weather affect the C2182 code?

Yes, extreme temperatures or moisture can interfere with the TPMS signal or damage the sensor, triggering the code.

Does the C2182 code always mean a sensor is bad?

Not necessarily. It could also indicate a communication issue, such as a problem with the TPMS antenna or incorrect sensor ID programming.

Can I reset the C2182 code without fixing the issue?

Clearing the code with a scan tool may temporarily turn off the TPMS warning light, but the issue will likely return until the underlying problem is resolved.