AutoCodes – Scion – C2177 Scion

C2177 Scion Code - Initialization Not Completed

Quick Answer

Initialization is necessary if one of the following occurs: The Tire Pressure Warning ECU and Receiver is replaced, a Tire Pressure Warning Valve and Transmitter is replaced, tires with a different tire standard pressure are installed, the tires are rotated, or a new vehicle is delivered. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2177 Scion indicates Initialization Not Completed.
Common causes: Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 710

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 21, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2177 Scion Description

OBDII Code C2177 Scion - Initialization Not Completed - AutoCodes.com — C2177 Scion Code - Initialization Not Completed

What does this mean?

What are the Possible Causes of the DTC C2177 Scion?

Faulty Tire Pressure Warning Valve and Transmitter
Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2177 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2177 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2177 Scion code?

Need more information on how to fix the C2177 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2177 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2177 Scion Code

1. What are the common symptoms of OBDII code C2177 "Initialization Not Completed" in a Scion?

- Common symptoms include the Check Engine Light (CEL) illuminating, rough idling, poor acceleration, and potential issues with the vehicle's stability control system.

2. What can cause the OBDII code C2177 to trigger in a Scion?

- The code C2177 "Initialization Not Completed" in a Scion is often triggered by a fault in the yaw rate sensor or steering angle sensor, which are crucial components of the vehicle's stability control system.

3. How can I diagnose the OBDII code C2177 in my Scion?

- Diagnosing OBDII code C2177 typically involves using a professional OBDII scanner to retrieve the code, followed by a thorough inspection of the yaw rate sensor, steering angle sensor, and related wiring for any signs of damage or malfunction.

4. Can I continue driving my Scion with the OBDII code C2177 present?

- It is not recommended to continue driving your Scion with the OBDII code C2177 present, as it can indicate potential safety concerns related to the vehicle's stability control system.

5. How can I repair the OBDII code C2177 in my Scion?

- Repairing the OBDII code C2177 usually involves addressing the underlying issue with the yaw rate sensor or steering angle sensor, which may require sensor replacement, recalibration, or wiring repairs.

6. Are there any DIY tips for fixing the OBDII code C2177 in a Scion?

- DIY tips for addressing the OBDII code C2177 in a Scion include checking and cleaning sensor connections, inspecting for any visible damage, and ensuring proper sensor alignment during reinstallation.

7. Can a faulty battery or electrical system cause the OBDII code C2177 in a Scion?

- Yes, a faulty battery or electrical system can potentially cause the OBDII code C2177 to trigger in a Scion, as stable voltage supply is crucial for the proper functioning of sensors related to the vehicle's stability control system.

8. Is it necessary to reset the OBDII code C2177 after repairing the issue in a Scion?

- Yes, it is recommended to reset the OBDII code C2177 after repairing the underlying issue in a Scion to clear the fault code and ensure proper operation of the vehicle's onboard diagnostics system.

9. Will the OBDII code C2177 clear on its own over time in a Scion?

- The OBDII code C2177 "Initialization Not Completed" in a Scion will not clear on its own over time and requires proper diagnosis and repair to resolve the underlying issue triggering the fault code.

10. Can a professional mechanic help diagnose and repair the OBDII code C2177 in my Scion?

- Yes, a professional mechanic with experience in automotive diagnostics can help accurately diagnose and repair the OBDII code C2177 in your Scion using specialized tools and expertise.