AutoCodesToyota – C2141 2013 Toyota RAV4

C2141 2013 Toyota RAV4 Code - Transmitter ID 1 Error

Quick Answer

The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C2141 2013 Toyota RAV4 indicates Transmitter ID 1 Error.
Common causes
Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 447
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 17, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2141 2013 Toyota RAV4 Description

The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the Tire Pressure Warning ECU and Receiver in the vehicle as radio waves. The ECU compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the warning light in the combination meter assembly illuminates.
When the internal circuit of a Tire Pressure Warning Valve and Transmitter is malfunctioning, this Diagnostic Trouble Code (DTC) is output.
OBDII Code C2141 2013 Toyota RAV4 - Transmitter ID 1 Error - AutoCodes.com
C2141 2013 Toyota RAV4 Code - Transmitter ID 1 Error

What are the Possible Causes of the DTC C2141 2013 Toyota RAV4?

  • Faulty Tire Pressure Warning Valve and Transmitter
  • Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2141 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2141 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2141 2013 Toyota RAV4 code?

Need more information on how to fix the C2141 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2141 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2141 2013 Toyota RAV4 Code

1. What does the OBDII code C2141 mean on a 2013 Toyota RAV4?

C2141 indicates a "Transmitter ID 1 Error," which typically relates to an issue with the tire pressure monitoring system (TPMS) transmitter or sensor.

2. What are the common symptoms of code C2141 in a 2013 Toyota RAV4?

Symptoms may include the TPMS warning light illuminating on the dashboard, failure to detect tire pressure readings, or incorrect tire pressure display.

3. What causes the C2141 code to appear on a 2013 Toyota RAV4?

The code is often caused by a malfunctioning or damaged TPMS sensor, a dead TPMS sensor battery, incorrect programming of the sensor ID, or electrical interference.

4. How can I diagnose the C2141 code on my Toyota RAV4?

Use a TPMS scan tool to verify the transmitter ID and check each TPMS sensor for proper operation. Inspect for physical damage or a low sensor battery.

5. Can a dead TPMS sensor battery trigger the C2141 code?

Yes, a dead or weak TPMS sensor battery can prevent the transmitter from sending signals, leading to this error code.

6. Is it necessary to replace the TPMS sensor to fix the C2141 code?

Not always. First, verify the sensor ID and battery status. If the sensor is confirmed faulty or has a dead battery, it may need replacement.

7. How do I reset the TPMS system after fixing code C2141?

After replacing or programming the sensor, use a TPMS reset tool or follow the owner's manual instructions for recalibrating the system.

8. Can improper tire rotations cause the C2141 code?

Yes, if the TPMS sensor IDs are not correctly reprogrammed during tire rotation, it can cause communication errors like C2141.

9. Can driving with a C2141 code affect my vehicle's performance?

No, this code won’t directly affect performance, but it may prevent the TPMS from accurately monitoring tire pressure, which can lead to unsafe driving conditions.

10. How much does it cost to repair the C2141 code in a 2013 Toyota RAV4?

Costs can vary. Replacing a TPMS sensor typically ranges from $50 to $150 per sensor, plus labor charges if done by a professional.

Discuss the causes and fixes for C2141 2013 Toyota RAV4 OBDII Code

Code C2141 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play