C2131 Scion Code - No Signal From Transmitter ID 1 In 2nd Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2131 Scion indicates No Signal From Transmitter ID 1 In 2nd Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2131 Scion Description
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2131 Scion?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning Antenna and Receiver
- Tire Pressure Warning Antenna and Receiver harness is open or shorted
- Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
- Faulty Tire Pressure Warning ECU
How to Fix the DTC C2131 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2131 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2131 Scion code?
Need more information on how to fix the C2131 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2131 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2131 Scion Code
1. What are the common symptoms of OBDII code C2131 in a Scion related to "No Signal From Transmitter ID 1 In 2nd Mode"?
Common symptoms include issues with the tire pressure monitoring system (TPMS) such as inaccurate or unavailable tire pressure readings on the dashboard.
2. What could cause the OBDII code C2131 in a Scion indicating "No Signal From Transmitter ID 1 In 2nd Mode"?
The code C2131 typically points to a malfunction with the TPMS transmitter in the tire, specifically with Transmitter ID 1 in 2nd mode.
3. How can I diagnose the issue behind the OBDII code C2131 in my Scion?
Proper diagnosis involves checking the TPMS sensors, receiver, and wiring for any faults or damage. Using a TPMS diagnostic tool can help pinpoint the exact cause of the communication failure.
4. Can a low tire pressure trigger the OBDII code C2131 in a Scion?
Yes, a low tire pressure condition can sometimes lead to the OBDII code C2131 as it affects the proper functioning of the TPMS transmitters.
5. Is it safe to continue driving my Scion with the OBDII code C2131 related to "No Signal From Transmitter ID 1 In 2nd Mode"?
It is generally safe to drive, but it is recommended to address the TPMS issue promptly to ensure accurate tire pressure monitoring for your safety and optimal vehicle performance.
6. What are some repair tips for fixing the OBDII code C2131 in a Scion?
Repair tips include checking and replacing faulty TPMS transmitters, ensuring proper sensor installation, and resetting the TPMS system after repairs are completed.
7. Can weather conditions affect the TPMS system and trigger the OBDII code C2131 in a Scion?
Extreme temperatures and weather conditions can impact the TPMS system's performance, potentially leading to communication errors like the C2131 code.
8. How much does it cost to repair the OBDII code C2131 in a Scion at a dealership or repair shop?
The cost of repair can vary depending on the extent of the issue, but it may involve sensor replacement, system reprogramming, or wiring repairs, which can range from $100 to $300 or more.
9. Will resetting the TPMS system clear the OBDII code C2131 in a Scion?
Resetting the TPMS system may temporarily clear the code, but if the underlying issue with Transmitter ID 1 persists, the code is likely to return until the problem is properly addressed.
10. Are there any recalls or technical service bulletins related to the OBDII code C2131 in Scion vehicles?
It's recommended to check with a Scion dealership or the manufacturer's website for any recalls or technical service bulletins related to the C2131 code to see if there are known issues or solutions provided by the manufacturer.
Discuss the causes and fixes for C2131 Scion OBDII Code
Code C2131 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
