C2124 2018 Toyota RAV4 Code - No Signal from Transmitter ID 4 In Main Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2124 2018 Toyota RAV4 indicates No Signal from Transmitter ID 4 In Main Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2124 2018 Toyota RAV4 Description
The Tire Pressure Warning Valve and Transmitters constantly send radio waves to the Tire Pressure Warning ECU and Receiver.
Under the conditions below, the Tire Pressure Warning ECU and Receiver is unable to receive the signals from the Tire Pressure Warning Valve and Transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire, wheel, and/or transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2124 2018 Toyota RAV4?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning ECU and Receiver
How to Fix the DTC C2124 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2124 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2124 2018 Toyota RAV4 code?
Need more information on how to fix the C2124 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2124 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2124 2018 Toyota RAV4 Code
1. What does OBDII code C2124 mean for a 2018 Toyota RAV4?
The code C2124 indicates "No Signal from Transmitter ID 4 In Main Mode," relating to a communication issue with the tire pressure monitoring system (TPMS).
2. What are the common symptoms of OBDII code C2124 in a 2018 Toyota RAV4?
Common symptoms include the TPMS warning light illuminating on the dashboard, inaccurate or missing tire pressure readings, and potential loss of TPMS functionality.
3. What are the possible causes of OBDII code C2124 in a 2018 Toyota RAV4?
Potential causes of the code C2124 include a malfunctioning TPMS sensor, low sensor battery voltage, sensor signal interference, or wiring/connectivity issues within the TPMS system.
4. How can I diagnose OBDII code C2124 in my 2018 Toyota RAV4?
Diagnosing the code typically involves using a TPMS diagnostic tool to check for communication with the TPMS sensors, inspecting sensor battery voltage, and verifying the integrity of TPMS system wiring.
5. Can I still drive my 2018 Toyota RAV4 with OBDII code C2124 present?
While the vehicle can still be driven with the code present, it's essential to address the underlying TPMS issue promptly to ensure accurate tire pressure monitoring and system functionality.
6. How can I repair OBDII code C2124 in my 2018 Toyota RAV4?
Repairing the code may involve replacing the faulty TPMS sensor, ensuring proper sensor installation, addressing any wiring/connectivity issues, and resetting the TPMS system after the repair.
7. Is it possible to reset OBDII code C2124 in a 2018 Toyota RAV4 without fixing the underlying issue?
Resetting the code without addressing the underlying TPMS problem will likely result in the code reappearing once the vehicle's diagnostic system detects the issue again.
8. Are there any DIY tips for resolving OBDII code C2124 in a 2018 Toyota RAV4?
DIY tips may include checking and adjusting tire pressures, inspecting sensor battery levels (if accessible), and visually inspecting TPMS sensor connections and wiring for any obvious issues.
9. How much does it typically cost to repair OBDII code C2124 in a 2018 Toyota RAV4?
The repair cost can vary depending on the specific issue causing the code, but it may range from around $50 to $200 for a single TPMS sensor replacement, excluding labor costs.
10. Can a local mechanic or dealership help with diagnosing and repairing OBDII code C2124 in a 2018 Toyota RAV4?
Yes, a qualified mechanic or dealership with experience in TPMS systems should be able to diagnose and repair OBDII code C2124 in a 2018 Toyota RAV4 efficiently.
Discuss the causes and fixes for C2124 2018 Toyota RAV4 OBDII Code
Code C2124 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
