AutoCodes – Subaru – C2122 Subaru

C2122 Subaru Code - Transmitter 2 No Data

Quick Answer

The Tire Pressure Monitor (TPM) system checks the tire pressures of all 4 road wheels when the vehicle is driven at speeds above 25 mph (40 km/h), and warns in the event of a loss of pressure by means of a low tire pressure warning light. Common causes include Tire pressure not to factory specifications, Faulty Tire Pressure Transmitter, Faulty Tire Pressure Monitor System (TPMS) Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C2122 Subaru indicates Transmitter 2 No Data.
Common causes
Common causes include Tire pressure not to factory specifications, Faulty Tire Pressure Transmitter, Faulty Tire Pressure Monitor System (TPMS) Control Module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,321
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C2122 Subaru Description

The Tire Pressure Monitor (TPM) system checks the tire pressures of all 4 road wheels when the vehicle is driven at speeds above 25 mph (40 km/h), and warns in the event of a loss of pressure by means of a low tire pressure warning light. A sensor installed in each wheel will indicate when tire pressure is severely low. The TPM system will activate only when the vehicle is driven. The Tire Pressure Monitor System (TPMS) Control Module monitors the tire pressure at each wheel. The TPMS Control Module sets the OBDII code when the tire pressure signal is not to factory specifications.
OBDII Code C2122 Subaru - Transmitter 2 No Data - AutoCodes.com
C2122 Subaru Code - Transmitter 2 No Data

What are the Possible Causes of the DTC C2122 Subaru?

  • Tire pressure not to factory specifications
  • Faulty Tire Pressure Transmitter
  • Faulty Tire Pressure Monitor System (TPMS) Control Module

How to Fix the DTC C2122 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2122 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2122 Subaru code?

Need more information on how to fix the C2122 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2122 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2122 Subaru Code

1. What are the common symptoms of OBDII code C2122 in a Subaru related to Transmitter 2 No Data?

- The common symptoms include issues with the tire pressure monitoring system (TPMS), the TPMS warning light illuminating on the dashboard, and inaccurate tire pressure readings.

2. What are the possible causes of OBDII code C2122 in a Subaru indicating Transmitter 2 No Data?

- Common causes include a malfunctioning tire pressure sensor, a faulty TPMS module, low tire pressure, damaged wiring or connectors, or a problem with the receiver unit.

3. How can I diagnose and repair OBDII code C2122 in my Subaru for Transmitter 2 No Data?

- Start by checking the tire pressure in all tires and ensuring they are properly inflated. Then, inspect the TPMS sensors, wiring, and connectors for any visible damage. If no issues are found, it may be necessary to use a diagnostic tool to reset the TPMS system or replace faulty components.

4. Can driving with OBDII code C2122 in a Subaru indicating Transmitter 2 No Data cause any further damage?

- While driving with this code may not directly cause damage to the vehicle, it is important to address the underlying issue promptly to ensure the TPMS system functions correctly for safety and performance reasons.

5. Are there any DIY tips for resolving OBDII code C2122 in a Subaru related to Transmitter 2 No Data?

- DIY tips include checking and adjusting tire pressure, inspecting the TPMS sensors for visible damage, and ensuring all wiring and connectors are securely connected. However, complex diagnostics and repairs may require professional assistance.

6. How much does it typically cost to repair OBDII code C2122 in a Subaru for Transmitter 2 No Data?

- The cost of repair can vary depending on the specific cause of the issue. Simple fixes like adjusting tire pressure may be inexpensive, while replacing TPMS sensors or modules can range from $50 to $200 per component, not including labor costs.

7. Can I reset OBDII code C2122 in my Subaru indicating Transmitter 2 No Data without visiting a mechanic?

- In some cases, you may be able to reset the code by using an OBDII scanner or diagnostic tool to clear the error code. However, if the issue persists, it is recommended to have the underlying problem diagnosed and repaired by a professional.

8. Is OBDII code C2122 in a Subaru related to Transmitter 2 No Data a common issue among Subaru vehicles?

- While not extremely common, issues with the TPMS system leading to code C2122 can occur in Subaru vehicles, especially in older models or those with high mileage. Regular maintenance and inspection can help prevent such problems.

9. Will OBDII code C2122 in a Subaru cause the vehicle to fail an emissions test?

- OBDII code C2122 related to Transmitter 2 No Data is not directly related to emissions control, so it should not cause the vehicle to fail an emissions test. However, it is still important to address and resolve the issue for overall vehicle safety and performance.

10. How long does it typically take to diagnose and repair OBDII code C2122 in a Subaru for Transmitter 2 No Data?

- The time needed to diagnose and repair this code can vary depending on the underlying cause and complexity of the issue. Simple fixes like adjusting tire pressure may take minutes, while more complicated repairs could take several hours or longer if professional assistance is required.

Discuss the causes and fixes for C2122 Subaru OBDII Code

Code C2122 Subaru comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play