C2114 Scion Code - Transmitter ID 4 Operation Stop
Quick Answer
The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2114 Scion indicates Transmitter ID 4 Operation Stop.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2114 Scion Description
What are the Possible Causes of the DTC C2114 Scion?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning ECU and Receiver
How to Fix the DTC C2114 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2114 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2114 Scion code?
Need more information on how to fix the C2114 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2114 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2114 Scion Code
1. What are the common symptoms of OBDII code C2114 in a Scion related to Transmitter ID 4 Operation Stop?
The common symptoms include difficulty starting the vehicle, intermittent issues with keyless entry, and a malfunctioning tire pressure monitoring system.
2. What are the possible causes of OBDII code C2114 in a Scion triggering Transmitter ID 4 Operation Stop?
Possible causes include a faulty transmitter or receiver, low battery in the key fob, issues with the tire pressure sensors, or a problem with the vehicle's wireless communication system.
3. How can I diagnose the cause of OBDII code C2114 in my Scion related to Transmitter ID 4 Operation Stop?
Diagnosis involves checking the battery in the key fob, ensuring the tire pressure sensors are functioning correctly, inspecting the transmitter and receiver for any damage, and using a diagnostic scanner to read the specific error codes.
4. Are there any DIY repair tips for resolving OBDII code C2114 in a Scion with Transmitter ID 4 Operation Stop?
DIY repair tips include replacing the battery in the key fob, checking and recalibrating the tire pressure sensors, and ensuring the transmitter and receiver are securely connected and functioning properly.
5. Can OBDII code C2114 in a Scion related to Transmitter ID 4 Operation Stop be fixed without professional help?
In some cases, simple fixes like replacing the key fob battery or recalibrating the tire pressure sensors can resolve the issue. However, if the problem persists, it's recommended to seek professional help for a thorough diagnosis and repair.
6. Is it safe to continue driving my Scion with OBDII code C2114 related to Transmitter ID 4 Operation Stop?
While the vehicle may still be operational with this error code, it's important to address the underlying issue promptly to avoid potential keyless entry or tire pressure monitoring system failures while driving.
7. How much does it typically cost to repair OBDII code C2114 in a Scion with Transmitter ID 4 Operation Stop?
The cost of repair can vary depending on the root cause of the issue. Simple fixes like replacing a key fob battery may be inexpensive, while more complex problems with the transmitter or receiver could incur higher costs.
8. Can resetting the vehicle's ECU help clear OBDII code C2114 related to Transmitter ID 4 Operation Stop in a Scion?
Resetting the ECU may temporarily clear the error code, but it's crucial to diagnose and address the underlying issue causing the code to prevent it from reoccurring.
9. How long does it usually take to repair OBDII code C2114 in a Scion related to Transmitter ID 4 Operation Stop?
The repair time can vary depending on the cause of the issue. Simple fixes like replacing a key fob battery can be done quickly, while diagnosing and repairing more complex problems may take longer.
10. Will OBDII code C2114 in a Scion with Transmitter ID 4 Operation Stop affect the vehicle's performance?
While the error code itself may not directly impact the vehicle's performance, unresolved issues with the keyless entry or tire pressure monitoring system can lead to inconvenience and potential safety concerns while driving.
Discuss the causes and fixes for C2114 Scion OBDII Code
Code C2114 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
