AutoCodesToyota – C2114 2018 Toyota RAV4

C2114 2018 Toyota RAV4 Code - Transmitter ID 4 Operation Stop

Quick Answer

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C2114 2018 Toyota RAV4 indicates Transmitter ID 4 Operation Stop.
Common causes
Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 198
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 15, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2114 2018 Toyota RAV4 Description

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the Tire Pressure Warning ECU and receiver in the vehicle as radio waves. The ECU compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the warning light in the combination meter assembly illuminates. The Tire Pressure Warning ECU and receiver stores a Diagnostic Trouble Code (DTC) when the tire pressure warning valve and transmitter stop transmitting signals. The signals can be forcibly transmitted by releasing the tire pressure rapidly. The stored DTC is cleared when signal transmission resumes.
OBDII Code C2114 2018 Toyota RAV4 - Transmitter ID 4 Operation Stop - AutoCodes.com
C2114 2018 Toyota RAV4 Code - Transmitter ID 4 Operation Stop

What are the Possible Causes of the DTC C2114 2018 Toyota RAV4?

  • Faulty Tire Pressure Warning Valve and Transmitter
  • Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2114 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2114 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2114 2018 Toyota RAV4 code?

Need more information on how to fix the C2114 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2114 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2114 2018 Toyota RAV4 Code

What does the OBDII code C2114 mean on a 2018 Toyota RAV4?

C2114 indicates an issue with "Transmitter ID 4 Operation Stop," which typically involves a problem with the tire pressure monitoring system (TPMS).

What are the symptoms of code C2114 in a 2018 Toyota RAV4?

Common symptoms include the TPMS warning light illuminating, failure to display tire pressure for one or more tires, or incorrect tire pressure readings.

What causes the C2114 code in a 2018 Toyota RAV4?

This code is usually caused by a malfunctioning TPMS sensor, a dead sensor battery, interference with the sensor signal, or a fault in the TPMS control module.

Can I drive my 2018 Toyota RAV4 with the C2114 code active?

Yes, you can drive the vehicle, but the TPMS may not provide accurate tire pressure monitoring, which can lead to unsafe driving conditions if tire pressure is not manually checked.

How do I diagnose the C2114 code in a 2018 Toyota RAV4?

Use an OBDII scanner to confirm the code, then inspect the TPMS sensors, check for signal interference, and test the TPMS control module for proper operation.

How do I fix the C2114 code in a 2018 Toyota RAV4?

The most common fix is replacing the faulty TPMS sensor or its battery. After replacement, recalibrate the system and clear the code using a scan tool.

What tools are needed to repair the C2114 code?

You’ll need an OBDII scanner or TPMS tool, a tire pressure gauge, and potentially a tire removal tool if you need to replace a TPMS sensor.

How much does it cost to repair the C2114 code?

Replacing a TPMS sensor typically costs $50–$150 per sensor, plus labor, which can add $50–$100 depending on the shop.

Can weather conditions cause the C2114 code?

Yes, extreme temperatures can affect TPMS sensor performance or shorten battery life, potentially triggering this code.

Is it necessary to recalibrate the TPMS after fixing the C2114 code?

Yes, after replacing or repairing a TPMS sensor, the system needs to be recalibrated to recognize the new sensor and ensure proper operation.

Discuss the causes and fixes for C2114 2018 Toyota RAV4 OBDII Code

Code C2114 2018 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play