AutoCodesToyota – C2113 2015 Toyota RAV4

C2113 2015 Toyota RAV4 Code - Transmitter ID 3 Operation Stop

Quick Answer

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C2113 2015 Toyota RAV4 indicates Transmitter ID 3 Operation Stop.
Common causes
Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,218
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 15, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2113 2015 Toyota RAV4 Description

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the Tire Pressure Warning ECU and receiver in the vehicle as radio waves. The ECU compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the warning light in the combination meter assembly illuminates. The Tire Pressure Warning ECU and receiver stores a Diagnostic Trouble Code (DTC) when the tire pressure warning valve and transmitter stop transmitting signals. The signals can be forcibly transmitted by releasing the tire pressure rapidly. The stored DTC is cleared when signal transmission resumes.
OBDII Code C2113 2015 Toyota RAV4 - Transmitter ID 3 Operation Stop - AutoCodes.com
C2113 2015 Toyota RAV4 Code - Transmitter ID 3 Operation Stop

What are the Possible Causes of the DTC C2113 2015 Toyota RAV4?

  • Faulty Tire Pressure Warning Valve and Transmitter
  • Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2113 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2113 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2113 2015 Toyota RAV4 code?

Need more information on how to fix the C2113 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2113 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2113 2015 Toyota RAV4 Code

1. What does OBDII code C2113 mean on a 2015 Toyota RAV4?

C2113 refers to "Transmitter ID 3 Operation Stop," indicating an issue with the third transmitter ID in the tire pressure monitoring system (TPMS).

2. What are the common symptoms of code C2113 on a 2015 Toyota RAV4?

Common symptoms include the TPMS warning light being illuminated and inaccurate or missing tire pressure readings from one or more tires.

3. What causes code C2113 on a 2015 Toyota RAV4?

This code is typically caused by a faulty or dead TPMS sensor, loss of communication with the TPMS module, or a programming error in the system.

4. How can I fix code C2113 on my 2015 Toyota RAV4?

Inspect the affected TPMS sensor, replace it if necessary, and ensure it is properly programmed to the vehicle’s system.

5. Can a dead TPMS sensor battery trigger code C2113?

Yes, a dead or low battery in a TPMS sensor can lead to a loss of communication and trigger this code.

6. How do I know which TPMS sensor is causing code C2113?

A diagnostic scan tool that reads TPMS data can help identify the specific sensor with the issue, in this case, Transmitter ID 3.

7. Is it safe to drive with code C2113 on my 2015 Toyota RAV4?

While the vehicle can still be driven, it’s important to address the issue promptly, as an inoperative TPMS can prevent you from detecting low tire pressure.

8. Does code C2113 always mean the TPMS sensor is faulty?

Not necessarily. It could also be caused by interference, a programming issue, or a problem with the TPMS module.

9. How much does it cost to fix code C2113 on a 2015 Toyota RAV4?

The cost depends on whether the TPMS sensor needs replacement or reprogramming, but sensor replacement typically ranges from $50 to $150 per sensor.

10. Can I clear code C2113 myself on a 2015 Toyota RAV4?

You can attempt to clear the code with an OBDII scanner after addressing the issue, but it may return if the underlying problem is not resolved.

Discuss the causes and fixes for C2113 2015 Toyota RAV4 OBDII Code

Code C2113 2015 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play