AutoCodes – Toyota – C2113 2014 Toyota RAV4

C2113 2014 Toyota RAV4 Code - Transmitter ID 3 Operation Stop

Quick Answer

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2113 2014 Toyota RAV4 indicates Transmitter ID 3 Operation Stop.
Common causes: Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 198

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2113 2014 Toyota RAV4 Description

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the Tire Pressure Warning ECU and receiver in the vehicle as radio waves. The ECU compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the warning light in the combination meter assembly illuminates. The Tire Pressure Warning ECU and receiver stores a Diagnostic Trouble Code (DTC) when the tire pressure warning valve and transmitter stop transmitting signals. The signals can be forcibly transmitted by releasing the tire pressure rapidly. The stored DTC is cleared when signal transmission resumes.

OBDII Code C2113 2014 Toyota RAV4 - Transmitter ID 3 Operation Stop - AutoCodes.com — C2113 2014 Toyota RAV4 Code - Transmitter ID 3 Operation Stop

What does this mean?

What are the Possible Causes of the DTC C2113 2014 Toyota RAV4?

Faulty Tire Pressure Warning Valve and Transmitter
Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2113 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2113 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2113 2014 Toyota RAV4 code?

Need more information on how to fix the C2113 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2113 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2113 2014 Toyota RAV4 Code

1. What does OBDII code C2113 on a 2014 Toyota RAV4 indicate?

The code C2113 in a 2014 Toyota RAV4 refers to "Transmitter ID 3 Operation Stop."

2. What are the common symptoms of OBDII code C2113 in a 2014 Toyota RAV4?

Common symptoms of code C2113 in a 2014 Toyota RAV4 may include issues with the tire pressure monitoring system (TPMS) and the inability to receive signals from the tire pressure sensors.

3. What are the possible causes of OBDII code C2113 in a 2014 Toyota RAV4?

Possible causes of code C2113 in a 2014 Toyota RAV4 include faulty tire pressure sensors, issues with the TPMS module, low tire pressure, or sensor battery failure.

4. How can I diagnose the OBDII code C2113 in my 2014 Toyota RAV4?

Diagnosing code C2113 in a 2014 Toyota RAV4 typically involves using a TPMS diagnostic tool to check the tire pressure sensors, inspecting the TPMS module, and verifying the tire pressure levels.

5. Can I drive my 2014 Toyota RAV4 with OBDII code C2113?

While it may be possible to drive your 2014 Toyota RAV4 with code C2113, it is recommended to address the TPMS issue promptly to ensure proper monitoring of tire pressure for safety and performance.

6. How can I repair OBDII code C2113 in my 2014 Toyota RAV4?

Repairing code C2113 in a 2014 Toyota RAV4 may involve replacing faulty tire pressure sensors, reprogramming the TPMS module, checking and adjusting tire pressure, or replacing sensor batteries.

7. Is it necessary to reset the TPMS system after fixing OBDII code C2113 in a 2014 Toyota RAV4?

Yes, after repairing code C2113 in a 2014 Toyota RAV4, it is important to reset the TPMS system to ensure proper calibration and functioning of the tire pressure monitoring sensors.

8. How much does it cost to fix OBDII code C2113 in a 2014 Toyota RAV4?

The cost of fixing code C2113 in a 2014 Toyota RAV4 can vary depending on the specific issue, parts needed for replacement, and labor costs. It is advisable to consult a professional mechanic for an accurate estimate.

9. Can a DIY enthusiast repair OBDII code C2113 in a 2014 Toyota RAV4?

While some aspects of addressing code C2113 in a 2014 Toyota RAV4 may be DIY-friendly, it is recommended to have a good understanding of TPMS systems and access to proper diagnostic tools before attempting repairs to ensure effectiveness and safety.