AutoCodes – Toyota – C2111 2013 Toyota RAV4

C2111 2013 Toyota RAV4 Code - Transmitter ID 1 Operation Stop

Quick Answer

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2111 2013 Toyota RAV4 indicates Transmitter ID 1 Operation Stop.
Common causes: Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning ECU and Receiver.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 178

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2111 2013 Toyota RAV4 Description

The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressures. The measured values are transmitted to the Tire Pressure Warning ECU and receiver in the vehicle as radio waves. The ECU compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the warning light in the combination meter assembly illuminates. The Tire Pressure Warning ECU and receiver stores a Diagnostic Trouble Code (DTC) when the tire pressure warning valve and transmitter stop transmitting signals. The signals can be forcibly transmitted by releasing the tire pressure rapidly. The stored DTC is cleared when signal transmission resumes.

OBDII Code C2111 2013 Toyota RAV4 - Transmitter ID 1 Operation Stop - AutoCodes.com — C2111 2013 Toyota RAV4 Code - Transmitter ID 1 Operation Stop

What does this mean?

What are the Possible Causes of the DTC C2111 2013 Toyota RAV4?

Faulty Tire Pressure Warning Valve and Transmitter
Faulty Tire Pressure Warning ECU and Receiver

How to Fix the DTC C2111 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2111 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2111 2013 Toyota RAV4 code?

Need more information on how to fix the C2111 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2111 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2111 2013 Toyota RAV4 Code

1. What does the OBDII code C2111 mean on a 2013 Toyota RAV4?

C2111 indicates an issue with "Transmitter ID 1 Operation Stop," meaning the vehicle's ECU is unable to detect or communicate with a specific tire pressure monitoring system (TPMS) sensor.

2. What are the symptoms of code C2111 on a 2013 Toyota RAV4?

Common symptoms include an illuminated TPMS warning light, inaccurate tire pressure readings, or no readings for one or more tires.

3. What causes the C2111 code to appear on a 2013 Toyota RAV4?

This code is typically caused by a malfunctioning or dead TPMS sensor, a damaged sensor antenna, incorrect sensor programming, or interference with the TPMS signal.

4. How do you diagnose code C2111 on a 2013 Toyota RAV4?

Diagnosis involves scanning the vehicle's TPMS system, checking the condition of each sensor, verifying the programmed transmitter IDs, and inspecting for any physical damage or signal interference.

5. Can a dead TPMS sensor battery trigger code C2111?

Yes, a dead or weak TPMS sensor battery is a common cause of this code, as it prevents the sensor from transmitting data to the ECU.

6. How do you fix code C2111 on a 2013 Toyota RAV4?

Repairs may include replacing the faulty TPMS sensor, reprogramming the sensor IDs, or repairing any damaged wiring or antennas in the TPMS system.

7. Do I need to replace all TPMS sensors if one is faulty?

No, only the faulty sensor needs to be replaced, but it is recommended to check the condition of all sensors if they are the same age, as their batteries may fail around the same time.

8. Can code C2111 be caused by aftermarket wheels or tires?

Yes, aftermarket wheels or tires without compatible TPMS sensors or proper programming can interfere with the system and trigger the C2111 code.

9. How much does it cost to fix code C2111 on a 2013 Toyota RAV4?

The cost can vary, but replacing a single TPMS sensor typically ranges from $50 to $200 per sensor, plus labor and reprogramming fees.

10. Can I drive with the C2111 code on my 2013 Toyota RAV4?

Yes, the vehicle is safe to drive, but the TPMS system may not function properly, which could prevent you from being alerted to low tire pressure. Regularly check tire pressures manually if the issue persists.