C200C Ford Code - Steering Shaft Torque Sensor 2
Quick Answer
The Power Steering Control Module (PSCM) monitors various inputs and outputs of the Electric Power-Assisted Steering (EPAS) system in order to keep the system operating at peak capacity. Common causes include Faulty Steering Shaft Torque Sensor 2, Steering Shaft Torque Sensor 2 harness is open or shorted, Steering Shaft Torque Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C200C Ford indicates Steering Shaft Torque Sensor 2.
- Common causes
- Common causes include Faulty Steering Shaft Torque Sensor 2, Steering Shaft Torque Sensor 2 harness is open or shorted, Steering Shaft Torque Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C200C Ford Description
What are the Possible Causes of the DTC C200C Ford?
- Faulty Steering Shaft Torque Sensor 2
- Steering Shaft Torque Sensor 2 harness is open or shorted
- Steering Shaft Torque Sensor 2 circuit poor electrical connection
How to Fix the DTC C200C Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C200C Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C200C Ford code?
Need more information on how to fix the C200C Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C200C Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C200C Ford Code
1. What are the common symptoms of OBDII code C200C in a Ford related to the Steering Shaft Torque Sensor 2?
The common symptoms include the illumination of the Check Engine Light, issues with the power steering system, and potential steering wheel control problems.
2. What are the possible causes of OBDII code C200C in a Ford related to the Steering Shaft Torque Sensor 2?
Possible causes include a faulty steering shaft torque sensor, wiring issues, damaged connectors, or a malfunction in the power steering control module.
3. How can I diagnose OBDII code C200C in a Ford related to the Steering Shaft Torque Sensor 2?
Diagnosis involves using an OBDII scanner to retrieve the fault code, inspecting the steering shaft torque sensor and its wiring, and performing any necessary tests recommended by the manufacturer.
4. Is it safe to continue driving with OBDII code C200C related to the Steering Shaft Torque Sensor 2 illuminated in a Ford?
It is not recommended to continue driving with this code illuminated, as it can affect the proper functioning of the power steering system and potentially compromise vehicle safety.
5. What are the repair options for OBDII code C200C in a Ford related to the Steering Shaft Torque Sensor 2?
Repair options may include replacing the faulty steering shaft torque sensor, repairing damaged wiring or connectors, or reprogramming the power steering control module as needed.
6. Can I reset OBDII code C200C related to the Steering Shaft Torque Sensor 2 in a Ford without fixing the underlying issue?
Resetting the code without addressing the underlying issue is not recommended, as the problem will likely resurface, potentially leading to further damage and safety concerns.
7. How can I prevent OBDII code C200C related to the Steering Shaft Torque Sensor 2 from recurring in my Ford?
Regular maintenance, timely repairs of any steering-related issues, and following the manufacturer's recommended service intervals can help prevent the recurrence of this OBDII code.
8. Are there any technical service bulletins (TSBs) related to OBDII code C200C in a Ford related to the Steering Shaft Torque Sensor 2?
Checking with a Ford dealership or authorized service center for any relevant TSBs specific to this OBDII code can provide additional insights or repair solutions.
9. Can a DIY enthusiast with some automotive knowledge repair OBDII code C200C related to the Steering Shaft Torque Sensor 2 in a Ford?
Depending on the skill level and tools available, some DIY enthusiasts may be able to address simpler issues related to this code, but complex repairs may require professional assistance.
10. How long does it typically take to repair OBDII code C200C related to the Steering Shaft Torque Sensor 2 in a Ford?
The repair time can vary based on the specific issue causing the code, the availability of parts, and the expertise of the technician, but it may range from a few hours to a full day in some cases.
Discuss the causes and fixes for C200C Ford OBDII Code
Code C200C Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
