AutoCodesToyota – C1AE6 2014 Toyota RAV4

C1AE6 2014 Toyota RAV4 Code - Ultrasonic Sensor Rear Left Corner Sensor

Quick Answer

The No. Common causes include Faulty No, 3 Ultrasonic Sensor (Rear Left [LH] Corner Sensor), No. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1AE6 2014 Toyota RAV4 indicates Ultrasonic Sensor Rear Left Corner Sensor.
Common causes
Common causes include Faulty No, 3 Ultrasonic Sensor (Rear Left [LH] Corner Sensor), No.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 168
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 14, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1AE6 2014 Toyota RAV4 Description

The No. 3 Ultrasonic Sensor (Rear Left [LH] Corner Sensor) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 3 Ultrasonic Sensor (Rear Left [LH] Corner Sensor). If the No. 3 Ultrasonic Sensor (Rear Left [LH] Corner Sensor) has an open circuit or other malfunction, it will not function normally.
OBDII Code C1AE6 2014 Toyota RAV4 - Ultrasonic Sensor Rear Left Corner Sensor - AutoCodes.com
C1AE6 2014 Toyota RAV4 Code - Ultrasonic Sensor Rear Left Corner Sensor

What are the Possible Causes of the DTC C1AE6 2014 Toyota RAV4?

  • Faulty No. 3 Ultrasonic Sensor (Rear Left [LH] Corner Sensor)
  • No. 3 Ultrasonic Sensor harness is open or shorted
  • No. 3 Ultrasonic Sensor circuit poor electrical connection
  • Faulty Clearance Warning ECU Assembly

How to Fix the DTC C1AE6 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1AE6 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1AE6 2014 Toyota RAV4 code?

Need more information on how to fix the C1AE6 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1AE6 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1AE6 2014 Toyota RAV4 Code

What does the OBDII code C1AE6 mean on a 2014 Toyota RAV4?

The code C1AE6 indicates an issue with the ultrasonic rear left corner sensor, which is part of the parking assist or proximity detection system.

What are common symptoms of the C1AE6 code in a 2014 Toyota RAV4?

Common symptoms include false or no alerts from the parking assist system, a malfunction warning light on the dashboard, or the system being disabled.

What causes the C1AE6 code to appear?

The most common causes are a dirty or damaged rear left ultrasonic sensor, a faulty sensor, wiring issues, or a malfunction in the parking assist ECU.

How can I diagnose the C1AE6 code?

Start by inspecting the rear left corner sensor for dirt, damage, or obstructions. Check the sensor's wiring and connections for any signs of damage or corrosion. If those are fine, further diagnostic testing with a scan tool may be needed.

Can a dirty sensor trigger the C1AE6 code?

Yes, dirt, mud, or debris on the rear left corner sensor can interfere with its operation and trigger this code.

How can I fix the C1AE6 code on my 2014 Toyota RAV4?

Cleaning the sensor, repairing or replacing damaged wiring, or replacing the faulty sensor are common fixes. In some cases, recalibrating the system may also be necessary.

How much does it cost to repair the C1AE6 code?

The cost depends on the issue. Cleaning the sensor is free if you do it yourself, while replacing a sensor may cost $100–$300, including parts and labor. Wiring repairs can vary based on complexity.

Can I drive with the C1AE6 code active?

Yes, but the parking assist system may not function properly, which could increase the risk of low-speed collisions when parking or reversing.

Is recalibration necessary after replacing the ultrasonic sensor?

Yes, recalibration of the parking assist system may be required to ensure proper sensor alignment and functionality.

How can I prevent the C1AE6 code from occurring again?

Regularly clean the sensors to prevent dirt buildup, avoid physical damage to the bumper area, and inspect the wiring periodically for wear or corrosion.

Discuss the causes and fixes for C1AE6 2014 Toyota RAV4 OBDII Code

Code C1AE6 2014 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play