C1AC2 2017 Toyota RAV4 Code - Slave Module Horizontal Axis Misalignment
Quick Answer
This Diagnostic Trouble Code (DTC) is stored when the angle of the Blind Spot Monitor Sensor Right (RH) deviates more than the allowable range from the horizontal axis. Common causes include Faulty Blind Spot Monitor Sensor Right (RH). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1AC2 2017 Toyota RAV4 indicates Slave Module Horizontal Axis Misalignment.
- Common causes
- Common causes include Faulty Blind Spot Monitor Sensor Right (RH).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1AC2 2017 Toyota RAV4 Description
What are the Possible Causes of the DTC C1AC2 2017 Toyota RAV4?
- Faulty Blind Spot Monitor Sensor Right (RH)
How to Fix the DTC C1AC2 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1AC2 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1AC2 2017 Toyota RAV4 code?
Need more information on how to fix the C1AC2 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1AC2 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1AC2 2017 Toyota RAV4 Code
1. What does the OBDII code C1AC2 mean on a 2017 Toyota RAV4?
C1AC2 indicates a "Slave Module Horizontal Axis Misalignment," meaning the vehicle’s parking assist ECU has detected an alignment issue with the slave module's horizontal axis.
2. What are the symptoms of the C1AC2 code in a 2017 Toyota RAV4?
Common symptoms include malfunctioning parking assist sensors, inaccurate distance warnings, and possible illumination of the parking assist or check engine light.
3. What causes the C1AC2 code to appear?
The code is typically triggered by improper installation or alignment of the slave module, physical damage to the module, or a system calibration issue.
4. Can I continue driving with the C1AC2 code on my 2017 Toyota RAV4?
Yes, you can continue driving, but parking assist features may not function correctly, which could increase the risk of parking-related accidents.
5. How do I fix the C1AC2 code on my 2017 Toyota RAV4?
The repair may involve checking and realigning the slave module, inspecting for physical damage, and recalibrating the system using a compatible scan tool.
6. Does the C1AC2 code require replacement of the slave module?
Not always. The module may only need realignment or recalibration unless it is physically damaged or defective.
7. How is the slave module alignment checked for the C1AC2 code?
A technician uses a scan tool to check the alignment parameters and may physically inspect the module to ensure it is correctly mounted.
8. Can I clear the C1AC2 code without fixing the issue?
Clearing the code without addressing the cause may result in the code returning and continued malfunction of the parking assist system.
9. How much does it cost to fix the C1AC2 code on a 2017 Toyota RAV4?
Costs can vary, but diagnosing and recalibrating the system typically ranges from $100 to $300. Module replacement, if needed, may cost more.
10. Is the C1AC2 code covered under warranty for a 2017 Toyota RAV4?
If your vehicle is still under warranty, especially a powertrain or emissions warranty, this issue may be covered. Check with your dealership for details.
Discuss the causes and fixes for C1AC2 2017 Toyota RAV4 OBDII Code
Code C1AC2 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
