AutoCodes – Toyota – C1AC2 2016 Toyota RAV4

C1AC2 2016 Toyota RAV4 Code - Slave Module Horizontal Axis Misalignment

Quick Answer

This Diagnostic Trouble Code (DTC) is stored when the angle of the Blind Spot Monitor Sensor Right (RH) deviates more than the allowable range from the horizontal axis. Common causes include Faulty Blind Spot Monitor Sensor Right (RH). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1AC2 2016 Toyota RAV4 indicates Slave Module Horizontal Axis Misalignment.
Common causes: Common causes include Faulty Blind Spot Monitor Sensor Right (RH).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 319

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 13, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1AC2 2016 Toyota RAV4 Description

This Diagnostic Trouble Code (DTC) is stored when the angle of the Blind Spot Monitor Sensor Right (RH) deviates more than the allowable range from the horizontal axis. If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor system on, the blind spot monitor system may store this DTC by mistake.

OBDII Code C1AC2 2016 Toyota RAV4 - Slave Module Horizontal Axis Misalignment - AutoCodes.com — C1AC2 2016 Toyota RAV4 Code - Slave Module Horizontal Axis Misalignment

What does this mean?

What are the Possible Causes of the DTC C1AC2 2016 Toyota RAV4?

Faulty Blind Spot Monitor Sensor Right (RH)

How to Fix the DTC C1AC2 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1AC2 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1AC2 2016 Toyota RAV4 code?

Need more information on how to fix the C1AC2 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1AC2 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1AC2 2016 Toyota RAV4 Code

1. What are the common symptoms of OBDII code C1AC2 on a 2016 Toyota RAV4?

- Common symptoms include improper steering wheel alignment, traction control system malfunction, and possible stability control issues.

2. What does the OBDII code C1AC2 indicate in a 2016 Toyota RAV4?

- The code C1AC2 indicates a Slave Module Horizontal Axis Misalignment in the vehicle's electronic control system.

3. What are the possible causes of the Slave Module Horizontal Axis Misalignment in a 2016 Toyota RAV4?

- The misalignment could be caused by a faulty steering angle sensor, damaged wiring, or issues with the electronic control module.

4. How can I diagnose the Slave Module Horizontal Axis Misalignment in my 2016 Toyota RAV4?

- Diagnosis involves using an OBDII scanner to retrieve the specific code, checking the steering angle sensor's readings, and inspecting the wiring for any visible damage.

5. Can I continue driving my 2016 Toyota RAV4 with the C1AC2 code present?

- It is not recommended to drive the vehicle with this code as it can affect the stability and control systems, potentially compromising safety.

6. What are some repair tips for addressing the Slave Module Horizontal Axis Misalignment in a 2016 Toyota RAV4?

- Repair tips include checking and recalibrating the steering angle sensor, repairing any damaged wiring, and resetting the electronic control module.

7. Can I reset the OBDII code C1AC2 in my 2016 Toyota RAV4 myself?

- It is possible to reset the code using an OBDII scanner, but it is recommended to address the underlying issue causing the misalignment first.

8. Is the repair for the Slave Module Horizontal Axis Misalignment covered under warranty for a 2016 Toyota RAV4?

- Depending on the vehicle's warranty status and the specific cause of the misalignment, the repair may be covered under warranty. It is advisable to check with your dealership.

9. How much does it typically cost to repair the Slave Module Horizontal Axis Misalignment in a 2016 Toyota RAV4?

- The cost of repair can vary based on the extent of the issue and the necessary repairs, but it can range from a few hundred to over a thousand dollars.

10. Can the Slave Module Horizontal Axis Misalignment affect other systems in a 2016 Toyota RAV4?

- Yes, the misalignment can impact the vehicle's stability control, traction control, and other related systems, leading to potential safety concerns if left unresolved.