C1AC1 Toyota Code - Master Module Horizontal Axis Misalignment
Quick Answer
This Diagnostic Trouble Code (DTC) is stored when the angle of the Blind Spot Monitor Sensor Left (LH) deviates more than the allowable range from the horizontal axis. Common causes include Faulty Blind Spot Monitor Sensor Left (LH). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1AC1 Toyota indicates Master Module Horizontal Axis Misalignment.
- Common causes
- Common causes include Faulty Blind Spot Monitor Sensor Left (LH).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1AC1 Toyota Description
What are the Possible Causes of the DTC C1AC1 Toyota?
- Faulty Blind Spot Monitor Sensor Left (LH)
How to Fix the DTC C1AC1 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1AC1 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1AC1 Toyota code?
Need more information on how to fix the C1AC1 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1AC1 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- C1AC1 2013 Toyota RAV4 — Master Module Horizontal Axis Misalignment
- C1AC1 2014 Toyota RAV4 — Master Module Horizontal Axis Misalignment
- C1AC1 2015 Toyota RAV4 — Master Module Horizontal Axis Misalignment
- C1AC1 2016 Toyota RAV4 — Master Module Horizontal Axis Misalignment
- C1AC1 2017 Toyota RAV4 — Master Module Horizontal Axis Misalignment
- C1AC1 2018 Toyota RAV4 — Master Module Horizontal Axis Misalignment
Frequently Asked Questions about C1AC1 Toyota Code
1. What does the OBDII code C1AC1 mean on a Toyota?
C1AC1 indicates "Master Module Horizontal Axis Misalignment," which suggests an issue with the alignment of the vehicle's pre-collision system master module.
2. What are the common symptoms of code C1AC1 on a Toyota?
Symptoms may include a malfunction warning for the pre-collision system, deactivation of the system, or a warning light on the dashboard.
3. What causes the C1AC1 code to trigger on a Toyota?
This code can be caused by improper installation or physical misalignment of the pre-collision system's master module, damage from an accident, or improper calibration.
4. How do I fix the C1AC1 code on a Toyota?
Repair typically involves realigning or recalibrating the master module to its correct horizontal position, often requiring specialized diagnostic tools.
5. Can I drive my Toyota with the C1AC1 code active?
Yes, you can drive the vehicle, but the pre-collision system may not function properly, potentially reducing safety features.
6. How is the C1AC1 code diagnosed on a Toyota?
A technician will use a scan tool to confirm the code, inspect the master module for physical misalignment, and check for any damage or calibration issues.
7. Does replacing the master module fix the C1AC1 code?
Not necessarily. The issue may stem from misalignment or calibration, so replacing the module without proper alignment may not resolve the problem.
8. Can a misaligned sensor cause the C1AC1 code?
Yes, if the master module's position is off due to sensor misalignment, the C1AC1 code can be triggered.
9. Is special equipment needed to fix the C1AC1 code on a Toyota?
Yes, specialized calibration tools and software are typically required to realign and recalibrate the master module.
10. How much does it cost to fix the C1AC1 code on a Toyota?
The cost varies depending on the extent of misalignment or damage but typically ranges from $150 to $500, including diagnostics and recalibration.
Discuss the causes and fixes for C1AC1 Toyota OBDII Code
Code C1AC1 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
