C1AA2 2013 Toyota RAV4 Code - Vehicle Speed Tolerance Malfunction
Quick Answer
For vehicles with Lane Departure Alert System: The Lane Departure Warning Camera receives the vehicle speed tolerance signal from the combination meter assembly via Controller Area Network (CAN) communication to control the lane departure alert system. Common causes include Faulty Lane Departure Warning Camera (For vehicles with Lane Departure Alert System), Faulty Combination Meter Assembly (Lane Departure Alert System [W/ Steering Control]), Faulty Forward Recognition Camera (Lane Departure Alert System [W/ Steering Control]). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1AA2 2013 Toyota RAV4 indicates Vehicle Speed Tolerance Malfunction.
- Common causes
- Common causes include Faulty Lane Departure Warning Camera (For vehicles with Lane Departure Alert System), Faulty Combination Meter Assembly (Lane Departure Alert System [W/ Steering Control]), Faulty Forward Recognition Camera (Lane Departure Alert System [W/ Steering Control]).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1AA2 2013 Toyota RAV4 Description
For vehicles with Lane Departure Alert System (W/ Steering Control): The Forward Recognition Camera receives vehicle speed tolerance signals from the Combination Meter Assembly. If the Combination Meter Assembly detects a vehicle speed tolerance malfunction signal, it informs the Forward Recognition Camera via CAN communication, and DTC C1AA2 is stored.
What are the Possible Causes of the DTC C1AA2 2013 Toyota RAV4?
- Faulty Lane Departure Warning Camera (For vehicles with Lane Departure Alert System)
- Faulty Combination Meter Assembly (Lane Departure Alert System [W/ Steering Control])
- Faulty Forward Recognition Camera (Lane Departure Alert System [W/ Steering Control])
How to Fix the DTC C1AA2 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
When replacing the Driving Support ECU Assembly, always replace it with a new one. If a Driving Support ECU Assembly which was installed in another vehicle is used, the information stored in the Driving Support ECU Assembly will not match the information from the vehicle. As a result, a DTC may be stored.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1AA2 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1AA2 2013 Toyota RAV4 code?
Need more information on how to fix the C1AA2 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1AA2 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1AA2 2013 Toyota RAV4 Code
What does the OBDII code C1AA2 mean for a 2013 Toyota RAV4?
C1AA2 indicates a "Vehicle Speed Tolerance Malfunction," meaning the vehicle's speed sensor data may not align with expected tolerances.
What are common symptoms of code C1AA2 in a 2013 Toyota RAV4?
Symptoms may include warning lights such as the ABS or traction control light, inconsistent speedometer readings, or reduced performance of vehicle stability systems.
What causes the C1AA2 code in a 2013 Toyota RAV4?
Common causes include faulty wheel speed sensors, damaged wiring or connectors, or issues within the ABS control module.
Can a dirty wheel speed sensor trigger code C1AA2?
Yes, dirt or debris on wheel speed sensors can cause incorrect readings, potentially triggering this code.
How do you diagnose the C1AA2 code on a 2013 Toyota RAV4?
Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting wheel speed sensors, checking wiring and connectors, and testing the ABS control module.
Can I drive my 2013 Toyota RAV4 with the C1AA2 code?
While the vehicle may still be drivable, stability and traction systems may be compromised, so it’s advised to address the issue promptly.
How do you fix the C1AA2 code on a 2013 Toyota RAV4?
Repairs may include cleaning or replacing wheel speed sensors, fixing wiring issues, or replacing the ABS control module if necessary.
How much does it cost to fix the C1AA2 code on a 2013 Toyota RAV4?
Repair costs vary depending on the issue but can range from $100 for sensor cleaning or replacement to over $1,000 for ABS module repairs.
Can a weak battery cause the C1AA2 code in a 2013 Toyota RAV4?
A weak or failing battery can sometimes cause communication errors in the vehicle's systems, potentially leading to this code.
Do I need to reset the system after fixing code C1AA2?
Yes, after repairs are completed, the system should be reset using an OBDII scanner to clear the code and verify the issue is resolved.
Discuss the causes and fixes for C1AA2 2013 Toyota RAV4 OBDII Code
Code C1AA2 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
