C1A4A Code - Skid Control Buzzer Circuit
Quick Answer
For vehicles with Dynamic Radar Cruise Control System: Based on Dynamic Radar Cruise Control System operation, the Driving Support ECU Assembly provides warnings to the driver by sounding the Skid Control Buzzer. Common causes include Faulty Skid Control Buzzer, Skid Control Buzzer harness is open or shorted, Skid Control Buzzer circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1A4A indicates Skid Control Buzzer Circuit.
- Common causes
- Common causes include Faulty Skid Control Buzzer, Skid Control Buzzer harness is open or shorted, Skid Control Buzzer circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1A4A Description
For vehicles with Pre-collision System: Based on pre-collision control, the Driving Support ECU Assembly provides warnings to the driver. The Driving Support ECU Assembly does this by sending a request signal to the Millimeter Wave Radar Sensor Assembly to sound the Skid Control Buzzer. When the Millimeter Wave Radar Sensor Assembly detects a malfunction in the Skid Control Buzzer circuit, a malfunction signal is sent to the Driving Support ECU Assembly, and this DTC is stored.
What are the Possible Causes of the DTC C1A4A?
- Faulty Skid Control Buzzer
- Skid Control Buzzer harness is open or shorted
- Skid Control Buzzer circuit poor electrical connection
- Faulty Driving Support ECU Assembly
How to Fix the DTC C1A4A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1A4A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1A4A code?
Need more information on how to fix the C1A4A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1A4A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1A4A Lexus — Skid Control Buzzer Circuit
- C1A4A Toyota — Skid Control Buzzer Circuit
Frequently Asked Questions about C1A4A Code
1. What does the OBDII code C1A4A mean?
The code C1A4A refers to a malfunction in the Skid Control Buzzer Circuit, which is responsible for alerting the driver during certain stability control or traction control events.
2. What are the common symptoms of code C1A4A?
Common symptoms include the traction control or stability control warning light being illuminated, absence of audible alerts from the skid control buzzer, and potential loss of driver warnings during stability control activation.
3. What causes the C1A4A code to be triggered?
The primary causes are a faulty skid control buzzer, damaged wiring or connectors in the circuit, or a malfunction in the skid control ECU.
4. How is the C1A4A code diagnosed?
Diagnosis usually involves scanning the vehicle with an OBDII tool, inspecting the wiring and connectors for damage, and testing the skid control buzzer and ECU functionality.
5. Can I drive with the C1A4A code active?
While the vehicle may still be drivable, the lack of audible warnings could reduce your awareness of stability control events, potentially compromising safety.
6. How do I fix the C1A4A code?
Repairs may include replacing the skid control buzzer, repairing or replacing damaged wiring, or addressing issues with the skid control ECU.
7. How much does it cost to fix the C1A4A code?
Costs depend on the specific repair needed, ranging from $50–$200 for a buzzer replacement to higher amounts if ECU repairs are required.
8. Can I reset the C1A4A code without repairing the issue?
Clearing the code without addressing the root cause will only temporarily remove it; the issue will likely return as the fault persists.
9. What tools are needed to troubleshoot C1A4A?
You’ll need an OBDII scanner, a multimeter to test the circuit, and potentially wiring diagrams for your vehicle.
10. Is the C1A4A code common across all vehicles?
No, this code is more specific to certain makes and models with advanced stability control systems that include a skid control buzzer.
Discuss the causes and fixes for C1A4A OBDII Code
Code C1A4A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
