C1A02 2018 Toyota RAV4 Code - Vehicle Information Not Obtained
Quick Answer
For vehicles with Dynamic Radar Cruise Control System: When a new Driving Support ECU Assembly is installed, it receives vehicle specification information (destination, steering wheel position, 2WD or AWD information, etc.) from the Main Body ECU (Multiplex Network Body ECU) and stores the information. Common causes include Faulty Driving Support ECU Assembly, Driving Support ECU Assembly harness is open or shorted, Driving Support ECU Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1A02 2018 Toyota RAV4 indicates Vehicle Information Not Obtained.
- Common causes
- Common causes include Faulty Driving Support ECU Assembly, Driving Support ECU Assembly harness is open or shorted, Driving Support ECU Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1A02 2018 Toyota RAV4 Description
For vehicles with Pre-collision System: When a new Driving Support ECU Assembly is installed, it receives vehicle specification information from the Main Body ECU (Multiplex Network Body ECU) and memorizes the information. DTC C1A02 is stored when the Driving Support ECU Assembly receives the vehicle specification information from the Main Body ECU (Multiplex Network Body ECU) but cannot record it.
What are the Possible Causes of the DTC C1A02 2018 Toyota RAV4?
- Faulty Driving Support ECU Assembly
- Driving Support ECU Assembly harness is open or shorted
- Driving Support ECU Assembly circuit poor electrical connection
How to Fix the DTC C1A02 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1A02 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1A02 2018 Toyota RAV4 code?
Need more information on how to fix the C1A02 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1A02 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1A02 2018 Toyota RAV4 Code
What does the OBDII code C1A02 mean on a 2018 Toyota RAV4?
The code C1A02 indicates "Vehicle Information Not Obtained," meaning the system is unable to retrieve necessary vehicle data for specific operations, often related to ADAS (Advanced Driver Assistance Systems).
What are the common symptoms of the C1A02 code in a 2018 Toyota RAV4?
Common symptoms include malfunctioning ADAS features such as lane-keeping assist, adaptive cruise control, or pre-collision systems, and the illumination of the check engine or warning lights.
What causes the C1A02 code to be triggered in a Toyota RAV4?
The main causes include a malfunctioning sensor, missing or corrupted vehicle data in the ECU, wiring issues, or a failed calibration of the ADAS system.
Can a weak battery cause the C1A02 code in a 2018 Toyota RAV4?
Yes, a weak or failing battery can disrupt system communications and cause this code to appear due to insufficient power for the electronics to function properly.
How do you diagnose the C1A02 code on a Toyota RAV4?
Diagnosis involves using a scan tool to confirm the code, inspecting vehicle sensors and wiring for damage, and checking for proper calibration or configuration of the ADAS system.
Can you drive a 2018 Toyota RAV4 with the C1A02 code?
You can likely still drive the vehicle, but ADAS functions may not work properly, increasing the risk of safety issues. It’s best to address the problem as soon as possible.
How is the C1A02 code fixed in a Toyota RAV4?
Repairs may include recalibrating the ADAS system, repairing or replacing faulty sensors, checking and repairing wiring, or updating the ECU software.
Does clearing the C1A02 code fix the issue?
Clearing the code may turn off the warning light temporarily, but if the underlying issue isn’t resolved, the code will likely return.
How much does it cost to fix the C1A02 code on a Toyota RAV4?
The repair cost varies depending on the issue, ranging from $100 for recalibration to $500 or more for sensor replacement or wiring repairs.
Can a software update resolve the C1A02 code in a Toyota RAV4?
In some cases, an ECU software update can resolve the issue if it stems from a software-related problem or missing data.
Discuss the causes and fixes for C1A02 2018 Toyota RAV4 OBDII Code
Code C1A02 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
