AutoCodes – Mercury – C1983 Mercury

C1983 Mercury Code - Parking Aid Is Inoperative

Quick Answer

The Parking Aid Module monitors the Parking Aid Sensor. Common causes include Faulty Parking Aid Sensor, Parking Aid Sensor harness is open or shorted, Parking Aid Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1983 Mercury indicates Parking Aid Is Inoperative.
Common causes: Common causes include Faulty Parking Aid Sensor, Parking Aid Sensor harness is open or shorted, Parking Aid Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 651

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 05, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1983 Mercury Description

The Parking Aid Module monitors the Parking Aid Sensor. The Parking Aid Module sets the OBDII code when the Parking Aid Sensor is not to factory specifications.

OBDII Code C1983 Mercury - Parking Aid Is Inoperative - AutoCodes.com — C1983 Mercury Code - Parking Aid Is Inoperative

What does this mean?

What are the Possible Causes of the DTC C1983 Mercury?

Faulty Parking Aid Sensor
Parking Aid Sensor harness is open or shorted
Parking Aid Sensor circuit poor electrical connection

How to Fix the DTC C1983 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1983 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1983 Mercury code?

Need more information on how to fix the C1983 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1983 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1983 Mercury Code

1. What are common symptoms of OBDII code C1983 in a Mercury related to parking aid inoperative?

- Common symptoms include the parking aid system not working at all, failure to detect obstacles, and display errors on the dashboard.

2. What are the possible causes of OBDII code C1983 in a Mercury causing the parking aid to be inoperative?

- The code C1983 can be triggered by faulty parking aid sensors, damaged wiring, a defective control module, or issues with the power supply to the system.

3. How can I diagnose the OBDII code C1983 issue in my Mercury's parking aid system?

- To diagnose the problem, you can use an OBDII scanner to read the trouble code, visually inspect the parking aid sensors and wiring, and test the control module for proper functionality.

4. Can I still drive my Mercury if the parking aid system is inoperative due to code C1983?

- Yes, you can still drive the vehicle, but you should be extra cautious while parking or maneuvering in tight spaces without the assistance of the parking aid system.

5. Are there any temporary solutions to reset the OBDII code C1983 in a Mercury's parking aid system?

- You can try resetting the code by disconnecting the car battery for a few minutes and reconnecting it. However, if the underlying issue is not fixed, the code may reappear.

6. Is it safe to attempt DIY repairs for the OBDII code C1983 issue in my Mercury's parking aid system?

- It is recommended to have a professional diagnose and repair the issue to ensure proper functioning of the parking aid system and avoid causing further damage.

7. How much does it typically cost to repair the OBDII code C1983 related to parking aid inoperative in a Mercury?

- Repair costs can vary depending on the specific cause of the issue, but it may range from $200 to $500 or more, including parts and labor.

8. Can extreme weather conditions affect the operation of the parking aid system in a Mercury triggering code C1983?

- Yes, extreme temperatures, moisture, or debris accumulation can impact the performance of the parking aid sensors and contribute to the inoperative system.

9. Will fixing the OBDII code C1983 related to parking aid inoperative affect the overall safety of my Mercury?

- Yes, repairing the parking aid system is essential for ensuring safe parking and maneuvering, especially in tight spaces where visibility is limited.

10. How can I prevent the OBDII code C1983 issue from reoccurring in my Mercury's parking aid system?

- Regularly inspect and maintain the parking aid system components, avoid physical damage to the sensors, and address any electrical issues promptly to prevent the code from reoccurring.