C1963 Code - Stability Control Inhibit Warning
Quick Answer
The steering wheel rotation (in degrees) is sent to the ABS module. Common causes include Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted, Steering Wheel Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1963 indicates Stability Control Inhibit Warning.
- Common causes
- Common causes include Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted, Steering Wheel Angle Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1963 Description
What are the Possible Causes of the DTC C1963?
- Faulty Steering Wheel Angle Sensor
- Steering Wheel Angle Sensor harness is open or shorted
- Steering Wheel Angle Sensor circuit poor electrical connection
How to Fix the DTC C1963?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1963 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1963 code?
Need more information on how to fix the C1963 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1963 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1963 Ford — Stability Control Inhibit Warning
- C1963 Lincoln — Stability Control Inhibit Warning
- C1963 Mercury — Stability Control Inhibit Warning
Frequently Asked Questions about C1963 Code
1. What are common symptoms of OBDII code C1963 (Stability Control Inhibit Warning)?
The common symptoms include the stability control warning light illuminating on the dashboard and potential loss of stability control functionality.
2. What can cause the OBDII code C1963 to trigger?
The code C1963 may be triggered due to issues with the stability control system sensors, wiring, or the control module itself.
3. How serious is the Stability Control Inhibit Warning indicated by code C1963?
The Stability Control Inhibit Warning indicated by code C1963 can affect the vehicle's stability control system, potentially reducing its effectiveness in certain driving conditions. It is recommended to address this issue promptly.
4. Can I continue driving my vehicle with the Stability Control Inhibit Warning and code C1963?
While it may be possible to drive the vehicle with the Stability Control Inhibit Warning present, it is not recommended as the stability control system may not function as intended, especially in slippery or emergency situations.
5. How can I diagnose and repair OBDII code C1963 related to the Stability Control Inhibit Warning?
Diagnosing code C1963 involves inspecting the stability control system components, such as sensors, wiring, and control module, for any faults or damage. Repair typically involves fixing or replacing the faulty components.
6. Is it possible to reset the OBDII code C1963 without addressing the underlying issue?
Resetting the code without fixing the underlying issue will only temporarily clear the warning light. The code is likely to reappear until the stability control system problem is resolved.
7. Can extreme weather conditions trigger the Stability Control Inhibit Warning with code C1963?
Yes, extreme weather conditions such as heavy rain, snow, or ice can potentially trigger the Stability Control Inhibit Warning if they affect the stability control system's sensors or functionality.
8. Are there any DIY steps I can take to troubleshoot code C1963 at home?
DIY steps for troubleshooting code C1963 may include visually inspecting the stability control system components for visible damage, checking the sensor connections, and ensuring the wiring is intact.
9. How much does it typically cost to repair OBDII code C1963 related to the Stability Control Inhibit Warning?
The cost of repairing code C1963 can vary depending on the underlying issue, the need for parts replacement, and labor costs. It is advisable to consult a professional mechanic for an accurate estimate.
10. Will fixing the Stability Control Inhibit Warning with code C1963 improve my vehicle's overall safety?
Yes, addressing the Stability Control Inhibit Warning by fixing code C1963 can help restore the proper functionality of the stability control system, enhancing your vehicle's safety on the road.
Discuss the causes and fixes for C1963 OBDII Code
-
I have this DTC code which has caused my check engine light to come on but I haven't noticed anything different with how the truck drives. I just discovered this today and have not had any work done to repair it yet and have not taken it to the Ford dealership.
2012 Ford F150 Ecoboost...any ideas? -
Sometimes the code is set when your vehicle is out of alignment. Start by checking if your vehicle is pulling. If it's pulling, then you need to do an alignment and that should take care of the code.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
