C1954 Mercury Code - Brake Master Cylinder Pressure Sensor Circuit Failure
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Brake Master Cylinder Pressure Sensor. Common causes include Faulty Brake Master Cylinder Pressure Sensor, Brake Master Cylinder Pressure Sensor harness is open or shorted, Brake Master Cylinder Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1954 Mercury indicates Brake Master Cylinder Pressure Sensor Circuit Failure.
- Common causes
- Common causes include Faulty Brake Master Cylinder Pressure Sensor, Brake Master Cylinder Pressure Sensor harness is open or shorted, Brake Master Cylinder Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1954 Mercury Description
What are the Possible Causes of the DTC C1954 Mercury?
- Faulty Brake Master Cylinder Pressure Sensor
- Brake Master Cylinder Pressure Sensor harness is open or shorted
- Brake Master Cylinder Pressure Sensor circuit poor electrical connection
How to Fix the DTC C1954 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1954 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1954 Mercury code?
Need more information on how to fix the C1954 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1954 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1954 Mercury Code
1. What does the OBDII code C1954 mean on a Mercury?
The code C1954 indicates a failure in the brake master cylinder pressure sensor circuit, which monitors the pressure applied to the brakes.
2. What are the common symptoms of code C1954 in a Mercury vehicle?
Symptoms may include the ABS warning light or brake light illuminating, reduced braking performance, or the ABS system not functioning properly.
3. What causes the C1954 code to appear?
The code can be triggered by a faulty brake pressure sensor, damaged wiring or connectors in the sensor circuit, or issues with the ABS control module.
4. Can I drive my Mercury with the C1954 code?
It’s not recommended to drive the vehicle until the issue is resolved, as it may compromise braking performance and safety.
5. How do I diagnose the C1954 code?
Start by inspecting the brake pressure sensor and its wiring for damage, corrosion, or loose connections. Use a scan tool to read sensor data for abnormalities.
6. How do I fix the C1954 code on my Mercury?
The repair may involve replacing the faulty brake pressure sensor, repairing damaged wiring, or resetting the ABS module after repairs.
7. Is replacing the brake master cylinder necessary for code C1954?
Not always. The issue is usually with the pressure sensor or its circuit, but if the master cylinder itself is damaged, replacement may be required.
8. How much does it cost to repair the C1954 code?
The cost varies depending on whether the sensor, wiring repair, or ABS module needs replacement, typically ranging from $150 to $500.
9. Can a low brake fluid level cause the C1954 code?
Low brake fluid level is not a direct cause of C1954 but can lead to braking issues that might trigger related codes. Always ensure proper fluid levels.
10. Will clearing the C1954 code fix the problem?
Clearing the code will turn off the warning light temporarily, but the issue will return unless the underlying problem is addressed.
Discuss the causes and fixes for C1954 Mercury OBDII Code
Code C1954 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
