AutoCodesMercury – C1904 Mercury

C1904 Mercury Code - Ride Control Right Rear Shock Actuator Circuit Short To Ground

Quick Answer

The Air Suspension Module monitors the Ride Control Right Rear Shock Actuator. Common causes include Faulty Ride Control Right Rear Shock Actuator, Ride Control Right Rear Shock Actuator harness is open or shorted, Ride Control Right Rear Shock Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1904 Mercury indicates Ride Control Right Rear Shock Actuator Circuit Short To Ground.
Common causes
Common causes include Faulty Ride Control Right Rear Shock Actuator, Ride Control Right Rear Shock Actuator harness is open or shorted, Ride Control Right Rear Shock Actuator circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 652
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Dec 03, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1904 Mercury Description

The Air Suspension Module monitors the Ride Control Right Rear Shock Actuator. The Air Suspension Module sets the OBDII code when the Ride Control Right Rear Shock Actuator is not to factory specifications.
OBDII Code C1904 Mercury - Ride Control Right Rear Shock Actuator Circuit Short To Ground - AutoCodes.com
C1904 Mercury Code - Ride Control Right Rear Shock Actuator Circuit Short To Ground

What are the Possible Causes of the DTC C1904 Mercury?

  • Faulty Ride Control Right Rear Shock Actuator
  • Ride Control Right Rear Shock Actuator harness is open or shorted
  • Ride Control Right Rear Shock Actuator circuit poor electrical connection
  • Faulty Air Suspension Module

How to Fix the DTC C1904 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1904 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1904 Mercury code?

Need more information on how to fix the C1904 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1904 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1904 Mercury Code

What does the OBDII code C1904 indicate?

The OBDII code C1904 indicates a problem with the right rear shock actuator circuit, specifically a short to ground condition.

What are common symptoms of a C1904 code?

Common symptoms include a warning light on the dashboard, a rough ride, or reduced ride control performance in the rear of the vehicle.

What could cause the C1904 code to trigger?

Causes may include damaged wiring or connectors, a faulty shock actuator, or issues with the vehicle’s ride control system.

How can I diagnose the C1904 code?

Start by visually inspecting the wiring and connectors for damage. Use a multimeter to check for continuity and shorts in the actuator circuit.

What is the typical repair for a C1904 code?

Repairs often involve fixing or replacing damaged wiring, connectors, or the right rear shock actuator itself.

Can I clear the C1904 code without fixing the issue?

Yes, you can clear the code, but it will likely reappear if the underlying issue is not resolved.

Will driving with a C1904 code cause further damage?

While it may not cause immediate damage, ignoring the issue can lead to further wear on the suspension system and compromised ride quality.

How much does it typically cost to repair a C1904 code?

Repair costs can vary widely, but expect to pay anywhere from $100 to $600, depending on whether you need to replace wiring, connectors, or the shock actuator.

Is it safe to drive a vehicle with a C1904 code?

While it may be drivable, it’s not recommended to drive with this code as it can affect handling and safety due to compromised ride control.

Discuss the causes and fixes for C1904 Mercury OBDII Code

Code C1904 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play