AutoCodesCadillac – C1762 Cadillac

C1762 Cadillac Code - Left Rear Position Sensor Input Fault

Quick Answer

The Suspension Control Module monitors the Left Rear Position Sensor. Common causes include Faulty Left Rear Position Sensor, Left Rear Position Sensor harness is open or shorted, Left Rear Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1762 Cadillac indicates Left Rear Position Sensor Input Fault.
Common causes
Common causes include Faulty Left Rear Position Sensor, Left Rear Position Sensor harness is open or shorted, Left Rear Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,141
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 22, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1762 Cadillac Description

The Suspension Control Module monitors the Left Rear Position Sensor. The Suspension Control Module sets the OBDII code when the Left Rear Position Sensor is not to factory specifications.
OBDII Code C1762 Cadillac - Left Rear Position Sensor Input Fault - AutoCodes.com
C1762 Cadillac Code - Left Rear Position Sensor Input Fault

What are the Possible Causes of the DTC C1762 Cadillac?

  • Faulty Left Rear Position Sensor
  • Left Rear Position Sensor harness is open or shorted
  • Left Rear Position Sensor circuit poor electrical connection

How to Fix the DTC C1762 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1762 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1762 Cadillac code?

Need more information on how to fix the C1762 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1762 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1762 Cadillac Code

1. What does OBDII code C1762 mean on a Cadillac?

C1762 indicates a fault in the left rear position sensor input, which monitors the suspension height or position of the rear left wheel.

2. What are the common symptoms of code C1762 in a Cadillac?

Symptoms may include an illuminated suspension or service light, uneven ride height, poor handling, or a noticeable sag on the left rear side of the vehicle.

3. What causes the C1762 code to appear on a Cadillac?

Common causes include a faulty left rear position sensor, damaged wiring or connectors, corrosion, or a malfunctioning suspension control module.

4. How do I diagnose the C1762 code on my Cadillac?

Start by visually inspecting the left rear position sensor and its wiring for damage or corrosion. Use a scan tool to verify the fault and test the sensor’s voltage or resistance.

5. Can I drive my Cadillac with the C1762 code?

While it may still be drivable, the suspension system may not function properly, leading to reduced ride comfort and handling. It’s best to address the issue promptly.

6. How do I fix the C1762 code on my Cadillac?

Repairs may include replacing the left rear position sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the suspension control module if needed.

7. How much does it cost to repair code C1762 on a Cadillac?

The cost varies depending on the exact issue. Replacing the position sensor typically costs $150-$300, while wiring repairs may cost less. Diagnostic fees may also apply.

8. Can a blown fuse cause the C1762 code to appear on a Cadillac?

It’s possible. Inspect the fuses related to the suspension control system to ensure they are intact and functioning properly.

9. What tools are needed to fix the C1762 code on a Cadillac?

You’ll need a scan tool capable of reading suspension codes, a multimeter to test sensor wiring, and basic hand tools for sensor or wiring replacement.

10. Does clearing the C1762 code resolve the issue permanently?

Clearing the code will turn off the warning temporarily, but if the underlying issue isn’t fixed, the code will reappear. Proper diagnosis and repair are essential.

Discuss the causes and fixes for C1762 Cadillac OBDII Code

Code C1762 Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play