C1752 - Continuous Electric Current To Height Control Compressor
C1752 Possible Causes
- Faulty Height Control Compressor
- Height Control Compressor harness is open or shorted
- Height Control Compressor circuit poor electrical connection
First diagnose C1752 code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the C1752 code
Labor: 1.0The cost of diagnosing the C1752 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
C1752 Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1752 DescriptionIf the vehicle height control is attempted on a steeply sloping road, when the vehicle is overloaded, or when the vehicle is jacked up with the engine running, the compressor motor operates continuously to raise vehicle height, and causes electric current to flow to the AIR SUS relay for 100 seconds or longer. Thus DTC C1751/51 may be output and vehicle height control may be suspended. (This is not electrically abnormal.) In this case, however, the vehicle height operation is resumed approx. 10 min. after the ignition switch is turned ON after the ECU detects the first error. If ECU detects another error, it takes 70 minutes until control is resumed.
C1752 More InformationNeed more information on how to fix the C1752 code?
Get Access to Factory Service Manuals
C1752 Information for specific makes
Need more help?Get the C1752 code diagnosed by a professional: Find a repair shop in your area
C1752 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C1752 code? Have you replaced any parts?
Any information is appreciated. Thanks