C1739 Code - Right Rear Height Control Solenoid Valve Circuit
Quick Answer
The Suspension Electronic Control Unit (ECU) energizes the height control solenoid valve, which opens the valve and leads compressed air to the pneumatic cylinder, thus raising the vehicle height. Common causes include Faulty Right Rear Height Control Solenoid Valve, Right Rear Height Control Solenoid Valve harness is open or shorted, Right Rear Height Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1739 indicates Right Rear Height Control Solenoid Valve Circuit.
- Common causes
- Common causes include Faulty Right Rear Height Control Solenoid Valve, Right Rear Height Control Solenoid Valve harness is open or shorted, Right Rear Height Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1739 Description
What are the Possible Causes of the DTC C1739?
- Faulty Right Rear Height Control Solenoid Valve
- Right Rear Height Control Solenoid Valve harness is open or shorted
- Right Rear Height Control Solenoid Valve circuit poor electrical connection
- Faulty Suspension Electronic Control Unit (ECU)
How to Fix the DTC C1739?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1739 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1739 code?
Need more information on how to fix the C1739 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1739 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1739 Lexus β Right Rear Height Control Solenoid Valve Circuit
- C1739 Toyota β Right Rear Height Control Solenoid Valve Circuit
Frequently Asked Questions about C1739 Code
1. What does OBDII code C1739 mean?
C1739 indicates an issue with the Right Rear Height Control Solenoid Valve Circuit, which is part of the vehicle's suspension system responsible for maintaining proper ride height.
2. What are common symptoms of code C1739?
Symptoms may include uneven ride height, a sagging or raised rear end on the right side, suspension warning lights, or a noticeable decrease in ride comfort.
3. What causes the C1739 code to appear?
Common causes include a faulty height control solenoid valve, damaged wiring or connectors in the solenoid circuit, a malfunctioning air compressor, or a control module issue.
4. Can I drive my vehicle with a C1739 code?
Driving with this code may be possible, but it could lead to further suspension damage or compromised handling, especially if the ride height is uneven or the air suspension is not functioning properly.
5. How is the C1739 code diagnosed?
A mechanic will typically check the solenoid valve for proper operation, inspect the wiring and connectors, test the air compressor, and use an OBDII scanner to confirm the fault.
6. How do I fix the C1739 code?
Repairs may include replacing the right rear height control solenoid valve, repairing damaged wiring or connectors, or recalibrating the suspension system control module.
7. How much does it cost to repair code C1739?
Repair costs can vary depending on the issue, but replacing the solenoid valve typically costs between $150 and $400, including parts and labor.
8. Can a blown fuse cause the C1739 code?
Yes, a blown fuse in the suspension or solenoid circuit could disrupt power to the solenoid and trigger the code.
9. Do I need to recalibrate the suspension after fixing the C1739 code?
In many cases, suspension recalibration is necessary after repairs to ensure proper ride height and system functionality.
10. What tools are needed to troubleshoot code C1739?
Tools may include an OBDII scanner, a multimeter for checking electrical continuity, and possibly a suspension system diagnostic tool for recalibration.
Discuss the causes and fixes for C1739 OBDII Code
Code C1739 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.