C1702 Ford Code - Parking Aid Right Rear Outer Sensor Circuit Short To Battery
Quick Answer
The parking aid system detects objects behind the vehicle when the vehicle is in REVERSE. Common causes include Faulty Parking Aid Right Rear Outer Sensor, Parking Aid Right Rear Outer Sensor harness is open or shorted, Parking Aid Right Rear Outer Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1702 Ford indicates Parking Aid Right Rear Outer Sensor Circuit Short To Battery.
- Common causes
- Common causes include Faulty Parking Aid Right Rear Outer Sensor, Parking Aid Right Rear Outer Sensor harness is open or shorted, Parking Aid Right Rear Outer Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1702 Ford Description
The parking aid system is enabled when the ignition switch is in the RUN position and REVERSE is selected. The system can be disabled through the message center RESET switch located in the instrument cluster. The parking aid menu is displayed until the transmission is taken out of REVERSE. While the menu is displayed, pressing the message center RESET switch changes the parking aid system status to OFF.
The parking aid system is disabled if a fault is detected in 1 of the 4 sensors, the parking aid speaker, or the parking aid module. This will be indicated by the parking aid disabled warning CHECK BACKUP AID displayed in the message center. The parking aid module is on the International Standards Organization (ISO) 9141 network and can be diagnosed with a diagnostic tool.
What are the Possible Causes of the DTC C1702 Ford?
- Faulty Parking Aid Right Rear Outer Sensor
- Parking Aid Right Rear Outer Sensor harness is open or shorted
- Parking Aid Right Rear Outer Sensor circuit poor electrical connection
How to Fix the DTC C1702 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1702 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1702 Ford code?
Need more information on how to fix the C1702 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1702 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1702 Ford Code
1. What does the OBDII code C1702 mean on a Ford vehicle?
C1702 indicates a Parking Aid Right Rear Outer Sensor Circuit Short to Battery, meaning the sensor is experiencing an electrical short related to the battery.
2. What are common symptoms of the C1702 code?
Symptoms include the parking aid system not functioning, an illuminated parking aid warning light, and possible audible alerts from the system.
3. What causes the C1702 code in Ford vehicles?
Common causes include damaged wiring, corroded or loose connections, a faulty right rear outer parking sensor, or a short circuit in the sensor circuit.
4. How can I diagnose the C1702 code?
Start by inspecting the wiring and connectors for damage or corrosion, check for continuity in the circuit, and test the right rear outer parking sensor for proper operation.
5. Can I drive with the C1702 code active?
Yes, you can drive, but the parking aid system will not function properly, which could make parking in tight spaces more difficult.
6. How do I fix the C1702 code?
Repairs may include replacing the faulty parking sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or addressing a short circuit.
7. How do I reset the C1702 code after repairs?
Use an OBDII scanner to clear the code once the necessary repairs are completed. If the issue persists, the code may reappear.
8. How much does it cost to fix the C1702 code on a Ford?
Costs vary but typically range from $50 to $300, depending on whether you need to replace the sensor or repair wiring.
9. Can a C1702 code be caused by water damage?
Yes, water intrusion can cause corrosion in the sensor or connectors, leading to the C1702 code.
10. Do I need to replace all parking sensors if one is faulty?
No, you only need to replace the faulty sensor, in this case, the right rear outer sensor. However, testing all sensors for proper function is recommended.
Discuss the causes and fixes for C1702 Ford OBDII Code
Code C1702 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.