AutoCodes – Lexus – C1695 Lexus

C1695 Lexus Code - Zero Point Calibration Of Vehicle Height Sensor Incomplete

Quick Answer

This Diagnostic Trouble Code (DTC) is stored when the Parking Assist ECU judges that the zero point calibration of the vehicle height sensor is incomplete (height control sensor vehicle height difference setting is incomplete). Common causes include Height control sensor vehicle height difference setting, Faulty Parking Assist ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1695 Lexus indicates Zero Point Calibration Of Vehicle Height Sensor Incomplete.
Common causes: Common causes include Height control sensor vehicle height difference setting, Faulty Parking Assist ECU.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 783

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 17, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1695 Lexus Description

OBDII Code C1695 Lexus - Zero Point Calibration Of Vehicle Height Sensor Incomplete - AutoCodes.com — C1695 Lexus Code - Zero Point Calibration Of Vehicle Height Sensor Incomplete

What does this mean?

What are the Possible Causes of the DTC C1695 Lexus?

Height control sensor vehicle height difference setting
Faulty Parking Assist ECU

How to Fix the DTC C1695 Lexus?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1695 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1695 Lexus code?

Need more information on how to fix the C1695 Lexus code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1695 Lexus code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1695 Lexus Code

1. What are the common symptoms of OBDII code C1695 in a Lexus related to zero point calibration of the vehicle height sensor?

The common symptoms include the vehicle sitting lower or higher than usual, uneven ride height, and the suspension feeling stiff or bouncy.

2. What can cause the OBDII code C1695 related to incomplete zero point calibration of the vehicle height sensor in a Lexus?

The code can be caused by a faulty height sensor, sensor wiring issues, alignment problems, or a glitch in the calibration process.

3. How important is it to address the OBDII code C1695 in a Lexus indicating incomplete zero point calibration of the vehicle height sensor?

It is crucial to address this code promptly as it can affect the vehicle's stability, handling, and safety, especially if the suspension system is not functioning correctly.

4. Can I perform the zero point calibration of the vehicle height sensor in a Lexus at home?

While some basic troubleshooting steps can be done at home, it is recommended to have the zero point calibration performed by a qualified technician using specialized tools and software.

5. Is resetting the OBDII code C1695 related to incomplete zero point calibration of the vehicle height sensor a temporary fix?

Resetting the code without addressing the underlying issue will likely result in the code reappearing. It is essential to diagnose and fix the root cause to prevent future problems.

6. How can I prevent the OBDII code C1695 from coming back after completing the zero point calibration on a Lexus?

Ensure that the height sensor is functioning correctly, the wiring is in good condition, and the suspension components are aligned properly. Regular maintenance can help prevent recurrence.

7. Are there any DIY tips for troubleshooting OBDII code C1695 in a Lexus related to incomplete zero point calibration?

You can visually inspect the height sensor and its wiring for any obvious signs of damage or corrosion. Checking the suspension components for wear and tear can also be helpful.

8. How long does it typically take to complete the zero point calibration of the vehicle height sensor in a Lexus?

The calibration process can vary depending on the model and the extent of the issue. It is best to consult with a professional technician for an accurate estimate of the time required.

9. Can driving with the OBDII code C1695 related to incomplete zero point calibration of the vehicle height sensor in a Lexus cause further damage?

Continued driving with this code present can potentially lead to accelerated wear on the suspension components and compromise the vehicle's handling and safety. It is advisable to address the issue promptly.

10. Is it safe to drive a Lexus with the OBDII code C1695 unaddressed?

Driving with the code unaddressed can pose safety risks due to potential suspension malfunctions. It is recommended to have the vehicle inspected and repaired to ensure proper functionality.