AutoCodes – Generic – C1626

C1626 Code - Steering Angle Sensor Failure

Quick Answer

This Diagnostic Trouble Code (DTC) is stored if the Parking Assist ECU or Television Camera Assembly receives a signal via Controller Area Network (CAN) communication from the Steering Angle Sensor that indicates an internal malfunction. Common causes include Faulty Steering Angle Sensor (Spiral Cable), Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1626 indicates Steering Angle Sensor Failure.
Common causes: Common causes include Faulty Steering Angle Sensor (Spiral Cable), Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,925

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 26, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1626 Description

OBDII Code C1626 - Steering Angle Sensor Failure - AutoCodes.com — C1626 Code - Steering Angle Sensor Failure

What does this mean?

What are the Possible Causes of the DTC C1626?

Faulty Steering Angle Sensor (Spiral Cable)
Steering Angle Sensor harness is open or shorted
Steering Angle Sensor circuit poor electrical connection

How to Fix the DTC C1626?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1626 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1626 code?

Need more information on how to fix the C1626 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1626 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C1626 Lexus — Steering Angle Sensor Failure
C1626 Toyota — Steering Angle Sensor Failure

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1626 Code

1. What are common symptoms of OBDII code C1626, Steering Angle Sensor Failure?

- Common symptoms include the traction control light or stability control light coming on, uneven steering response, and potential loss of power steering assistance.

2. What can cause OBDII code C1626 to trigger for Steering Angle Sensor Failure?

- The code C1626 can be triggered by a faulty steering angle sensor, damaged wiring or connections to the sensor, or issues with the steering angle sensor calibration.

3. How can I diagnose the Steering Angle Sensor Failure causing OBDII code C1626?

- Diagnosis involves using a diagnostic scanner to read the OBDII code, checking the steering angle sensor readings, inspecting the wiring and connections, and performing a calibration procedure if necessary.

4. Can a DIY'er repair OBDII code C1626 related to Steering Angle Sensor Failure?

- While some basic checks like inspecting connections can be done by DIY'ers, recalibrating or replacing the steering angle sensor usually requires specialized tools and knowledge, best left to professionals.

5. How critical is it to address OBDII code C1626, Steering Angle Sensor Failure?

- It is essential to address this issue promptly to ensure proper functioning of the vehicle's stability control system, as driving with a faulty steering angle sensor can affect safety and handling.

6. Are there temporary fixes for OBDII code C1626 Steering Angle Sensor Failure?

- Temporary fixes like resetting the system by disconnecting the battery may clear the code temporarily, but the underlying issue with the steering angle sensor should still be addressed to prevent further problems.

7. What is the typical cost to repair OBDII code C1626 related to Steering Angle Sensor Failure?

- The cost of repair can vary depending on the cause of the issue, but it may involve sensor recalibration, wiring repairs, or sensor replacement, which can range from a few hundred to over a thousand dollars.

8. Can driving with OBDII code C1626, Steering Angle Sensor Failure, cause further damage?

- Continuing to drive with a faulty steering angle sensor can potentially lead to unsafe driving conditions, compromised stability control, and further damage to other related components in the vehicle.

9. Is it possible for OBDII code C1626, Steering Angle Sensor Failure, to intermittently reset on its own?

- Yes, intermittent issues with the steering angle sensor or its connections can sometimes cause the code to reset temporarily, but the underlying problem should still be diagnosed and repaired.

10. How long does it typically take to repair OBDII code C1626 for Steering Angle Sensor Failure?

- The repair time can vary based on the exact cause of the issue and the complexity of the repair needed, but it may take a few hours to a full day for diagnosis and repair.