AutoCodes – Mitsubishi – C1616 Mitsubishi

C1616 Mitsubishi Code - Cranking Signal System

Quick Answer

The All Wheel Control (AWC) ECU receives the signal of the ignition switch from Electronically Controlled System (ETACS) ECU via CAN communication. Common causes include Faulty Electronically Controlled System (ETACS) ECU, Faulty Ignition Switch, Electronically Controlled System (ETACS) ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1616 Mitsubishi indicates Cranking Signal System.
Common causes: Common causes include Faulty Electronically Controlled System (ETACS) ECU, Faulty Ignition Switch, Electronically Controlled System (ETACS) ECU harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,489

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 12, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1616 Mitsubishi Description

The All Wheel Control (AWC) ECU receives the signal of the ignition switch from Electronically Controlled System (ETACS) ECU via CAN communication. The code is set when the cranking signal is set for five seconds or more continuously while driving.

OBDII Code C1616 Mitsubishi - Cranking Signal System - AutoCodes.com — C1616 Mitsubishi Code - Cranking Signal System

What does this mean?

What are the Possible Causes of the DTC C1616 Mitsubishi?

Faulty Electronically Controlled System (ETACS) ECU
Faulty Ignition Switch
Electronically Controlled System (ETACS) ECU harness is open or shorted
Electronically Controlled System (ETACS) ECU circuit poor electrical connection
Faulty All Wheel Control (AWC) ECU

How to Fix the DTC C1616 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1616 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1616 Mitsubishi code?

Need more information on how to fix the C1616 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1616 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1616 Mitsubishi Code

1. What does OBDII code C1616 for Mitsubishi indicate?

- The C1616 code refers to a problem with the Cranking Signal System in Mitsubishi vehicles.

2. What are the common symptoms of OBDII code C1616 in a Mitsubishi?

- Common symptoms include difficulty starting the vehicle, intermittent starting issues, and the engine not cranking.

3. What are the possible causes of OBDII code C1616 in a Mitsubishi?

- The code C1616 can be triggered by faulty crankshaft position sensors, wiring issues, a weak battery, or a malfunctioning starter motor.

4. How can I diagnose OBDII code C1616 in my Mitsubishi?

- Diagnosing code C1616 typically involves checking the condition of the crankshaft position sensor, inspecting the wiring for any damage, and testing the battery and starter motor.

5. Can a bad battery cause OBDII code C1616 in a Mitsubishi?

- Yes, a weak or failing battery can lead to code C1616 because it affects the power supply needed for the cranking signal system to function properly.

6. How can I repair OBDII code C1616 in my Mitsubishi?

- Repairing code C1616 may involve replacing the crankshaft position sensor, repairing any damaged wiring, testing and possibly replacing the battery, or repairing/replacing the starter motor.

7. Is it safe to continue driving with OBDII code C1616 in my Mitsubishi?

- It is not recommended to continue driving with code C1616 present, as it can lead to potential issues with starting the vehicle and may cause further damage to the engine or electrical system.

8. Can a DIY enthusiast fix OBDII code C1616 in a Mitsubishi?

- Depending on the cause of the code, some DIY enthusiasts may be able to address the issue by replacing the crankshaft position sensor or checking and repairing wiring connections. However, complex issues may require professional diagnosis and repair.

9. How much does it typically cost to repair OBDII code C1616 in a Mitsubishi?

- The cost of repairing code C1616 can vary depending on the root cause of the issue and whether it can be addressed with a simple fix like replacing a sensor or if more extensive repairs are needed. Costs may range from a few hundred dollars to over a thousand dollars.

10. Can resetting the OBDII system clear code C1616 in a Mitsubishi?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing code C1616 is not addressed, the code is likely to reappear. It's important to diagnose and repair the root cause of the problem for a lasting solution.