C152A Chrysler Code - Right Rear Ride Height Sensor
Quick Answer
The Air Suspension Control Module (ASCM) monitors the Right Rear Ride Height Sensor. Common causes include Faulty Right Rear Ride Height Sensor, Right Rear Ride Height Sensor harness is open or shorted, Right Rear Ride Height Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C152A Chrysler indicates Right Rear Ride Height Sensor.
- Common causes
- Common causes include Faulty Right Rear Ride Height Sensor, Right Rear Ride Height Sensor harness is open or shorted, Right Rear Ride Height Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C152A Chrysler Description
What are the Possible Causes of the DTC C152A Chrysler?
- Faulty Right Rear Ride Height Sensor
- Right Rear Ride Height Sensor harness is open or shorted
- Right Rear Ride Height Sensor circuit poor electrical connection
- Faulty Air Suspension Control Module (ASCM)
How to Fix the DTC C152A Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
C1526-15-RIGHT REAR RIDE HEIGHT SENSOR - CIRCUIT SHORT TO BATTERY OR OPEN
C1526-36-RIGHT REAR RIDE HEIGHT SENSOR-SIGNAL FREQUENCY TOO LOW
C1526-37-RIGHT REAR RIDE HEIGHT SENSOR-SIGNAL FREQUENCY TOO HIGH
C1526-76-RIGHT REAR RIDE HEIGHT SENSOR - WRONG MOUNTING POSITION
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C152A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C152A Chrysler code?
Need more information on how to fix the C152A Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C152A Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C152A Chrysler Code
1. What are the common symptoms of OBDII code C152A on a Chrysler related to the Right Rear Ride Height Sensor?
The common symptoms include uneven ride height in the right rear of the vehicle, a noticeable tilt or sag on one side, and potential suspension issues.
2. What can cause the OBDII code C152A related to the Right Rear Ride Height Sensor in a Chrysler?
Possible causes of this code can be a faulty ride height sensor, damaged wiring or connectors, calibration issues, or problems with the suspension system.
3. How can I diagnose the OBDII code C152A on my Chrysler indicating a problem with the Right Rear Ride Height Sensor?
Diagnosis typically involves using a diagnostic scan tool to read the code, visually inspecting the ride height sensor and its connections, and performing tests to check the sensor's functionality.
4. Are there any DIY repair tips for addressing the OBDII code C152A related to the Right Rear Ride Height Sensor in a Chrysler?
DIY repairs may include checking and repairing damaged wiring, ensuring proper sensor alignment and calibration, and clearing the code to see if the issue persists.
5. Can driving with the OBDII code C152A on a Chrysler due to the Right Rear Ride Height Sensor problem cause further damage?
Continued driving with this issue may lead to uneven tire wear, compromised handling, and potential damage to other suspension components over time, so it's best to address it promptly.
6. Is it safe to continue driving my Chrysler with the OBDII code C152A indicating an issue with the Right Rear Ride Height Sensor?
While the vehicle may still be driveable, it is recommended to have the issue diagnosed and repaired to ensure optimal performance, safety, and stability on the road.
7. How much does it typically cost to repair the OBDII code C152A related to the Right Rear Ride Height Sensor in a Chrysler?
The cost of repair can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, calibration adjustments, or suspension system repairs.
8. Can a mechanic easily reset the OBDII code C152A after repairing the Right Rear Ride Height Sensor issue on my Chrysler?
Yes, a mechanic can use a diagnostic scan tool to reset the code after addressing the problem with the Right Rear Ride Height Sensor, allowing for a fresh start and monitoring of the system.
9. Are there any recalls or technical service bulletins related to the OBDII code C152A and the Right Rear Ride Height Sensor in Chrysler vehicles?
It's advisable to check with Chrysler or authorized dealerships for any relevant recalls or technical service bulletins addressing issues with the Right Rear Ride Height Sensor and related OBDII codes.
10. What steps should I take if the OBDII code C152A keeps reoccurring even after repairing the Right Rear Ride Height Sensor problem in my Chrysler?
If the code persists, it's recommended to recheck the repairs, verify sensor calibration, inspect for any additional issues, and potentially seek further diagnostic assistance from a professional technician.
Discuss the causes and fixes for C152A Chrysler OBDII Code
Code C152A Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
