C1499 Jeep Code - Rear Driveline Module Motor Position Performance Or Incorrect Operation
Quick Answer
The Drive Train Control Module (DTCM) monitors the Rear Driveline Module (RDM). Common causes include Faulty Rear Driveline Module (RDM), Rear Driveline Module (RDM) harness is open or shorted, Rear Driveline Module (RDM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1499 Jeep indicates Rear Driveline Module Motor Position Performance Or Incorrect Operation.
- Common causes
- Common causes include Faulty Rear Driveline Module (RDM), Rear Driveline Module (RDM) harness is open or shorted, Rear Driveline Module (RDM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1499 Jeep Description
What are the Possible Causes of the DTC C1499 Jeep?
- Faulty Rear Driveline Module (RDM)
- Rear Driveline Module (RDM) harness is open or shorted
- Rear Driveline Module (RDM) circuit poor electrical connection
- Faulty Drive Train Control Module (DTCM)
How to Fix the DTC C1499 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1499 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1499 Jeep code?
Need more information on how to fix the C1499 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1499 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1499 Jeep Code
1. What does the OBDII code C1499 mean for a Jeep?
C1499 indicates a problem with the Rear Driveline Module Motor's position performance or operation, typically tied to the all-wheel-drive or four-wheel-drive system.
2. What are common symptoms of the C1499 code?
Symptoms may include the service 4WD light activating, loss of AWD/4WD functionality, unusual noises from the rear driveline, or reduced vehicle traction.
3. What causes the C1499 code to appear on a Jeep?
Common causes include a faulty driveline module motor, damaged wiring or connectors, mechanical issues in the rear driveline, or a software-related malfunction.
4. Can I continue driving with the C1499 code on my Jeep?
While you can drive, it’s not recommended because the vehicle may experience reduced traction or AWD/4WD capabilities, especially in slippery conditions.
5. How can I troubleshoot the C1499 code on my Jeep?
Start by inspecting the wiring and connectors for damage, checking the rear driveline motor for proper operation, and scanning for additional codes to identify related issues.
6. Does the C1499 code require replacing the Rear Driveline Module Motor?
Not always; the issue could be due to wiring problems, calibration issues, or other components in the driveline system. Proper diagnosis is necessary.
7. How much does it cost to repair the C1499 code on a Jeep?
Repair costs vary but can range from $200 to $800 or more, depending on whether the issue involves wiring repairs, motor replacement, or other mechanical repairs.
8. Can a software update fix the C1499 code on a Jeep?
In some cases, a software update or reprogramming of the module may resolve the issue if it’s caused by a calibration error.
9. What tools are needed to diagnose the C1499 code?
You'll need an advanced OBDII scanner capable of reading manufacturer-specific codes, as well as tools for inspecting and testing electrical connections and the driveline motor.
10. How can I prevent the C1499 code from occurring again?
Regular maintenance of the 4WD/AWD system, ensuring wiring is secure and free from damage, and addressing drivetrain issues promptly can help prevent this code.
Discuss the causes and fixes for C1499 Jeep OBDII Code
Code C1499 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
