AutoCodesLexus – C146F Lexus

C146F Lexus Code - Short in ABS Solenoid Relay Circuit

Quick Answer

The Anti-Lock Brake System (ABS) solenoid relay supplies power to the ABS solenoid and TRAC solenoid. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C146F Lexus indicates Short in ABS Solenoid Relay Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 329
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 30, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C146F Lexus Description

The Anti-Lock Brake System (ABS) solenoid relay supplies power to the ABS solenoid and TRAC solenoid. The solenoid relay is turned on 1.5 seconds after the ignition switch is turned to ON and is turned off if an open or short in the solenoid is detected by the self-diagnosis performed when the engine starts running. The ABS solenoid relay is housed in the Skid Control ECU (Brake Actuator Assembly) in the actuator assembly. The Diagnostic Trouble Code (DTC) will be set immediately after the ignition switch to ON and the solenoid relay is OFF, relay contact is ON continuously for 4.5 seconds or more.
OBDII Code C146F Lexus - Short in ABS Solenoid Relay Circuit - AutoCodes.com
C146F Lexus Code - Short in ABS Solenoid Relay Circuit

What are the Possible Causes of the DTC C146F Lexus?

  • Faulty Skid Control ECU (Brake Actuator Assembly)
  • Skid Control ECU harness is open or shorted
  • Skid Control ECU circuit poor electrical connection

How to Fix the DTC C146F Lexus?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C146F Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C146F Lexus code?

Need more information on how to fix the C146F Lexus code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C146F Lexus code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C146F Lexus Code

What does the OBDII code C146F mean for a Lexus?

C146F indicates a short circuit issue in the ABS solenoid relay circuit, which can affect the operation of the vehicle's anti-lock braking system.

What are common symptoms of the C146F code in a Lexus?

Symptoms may include illuminated ABS warning lights, reduced braking performance, and possible loss of ABS functionality.

What causes the C146F code to appear?

The code is typically caused by wiring damage, a short circuit in the ABS solenoid relay, or a malfunctioning ABS solenoid relay.

Can I drive my Lexus with the C146F code?

Driving with this code is possible but not recommended, as the ABS system may not function properly, increasing the risk of skidding during braking.

How can I diagnose the C146F code in a Lexus?

Use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage, and test the ABS solenoid relay for proper operation.

What tools are needed to troubleshoot the C146F code?

You’ll need an OBDII scanner, a multimeter for testing electrical circuits, and possibly wiring diagrams for your Lexus model.

How do I fix the C146F code in my Lexus?

Repairs may include replacing damaged wiring, repairing connectors, or replacing the faulty ABS solenoid relay.

Will clearing the C146F code fix the problem?

No, clearing the code will not resolve the underlying issue; the root cause of the short circuit must be addressed.

How much does it typically cost to repair the C146F code?

Repair costs vary, but replacing an ABS solenoid relay can cost between $100 and $300, excluding labor, while wiring repairs depend on the extent of damage.

Should I take my Lexus to a mechanic for the C146F code?

If you’re unfamiliar with electrical diagnostics or ABS components, it’s best to consult a qualified mechanic to ensure proper repairs.

Discuss the causes and fixes for C146F Lexus OBDII Code

Code C146F Lexus comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play