AutoCodesToyota – C146F 2014 Toyota RAV4

C146F 2014 Toyota RAV4 Code - Short in ABS Solenoid Relay Circuit

Quick Answer

The Anti-Lock Brake System (ABS) solenoid relay supplies power to the ABS solenoid and TRAC solenoid. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C146F 2014 Toyota RAV4 indicates Short in ABS Solenoid Relay Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 247
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 30, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C146F 2014 Toyota RAV4 Description

The Anti-Lock Brake System (ABS) solenoid relay supplies power to the ABS solenoid and TRAC solenoid. The solenoid relay is turned on 1.5 seconds after the ignition switch is turned to ON and is turned off if an open or short in the solenoid is detected by the self-diagnosis performed when the engine starts running. The ABS solenoid relay is housed in the Skid Control ECU (Brake Actuator Assembly) in the actuator assembly. The Diagnostic Trouble Code (DTC) will be set immediately after the ignition switch to ON and the solenoid relay is OFF, relay contact is ON continuously for 4.5 seconds or more.
OBDII Code C146F 2014 Toyota RAV4 - Short in ABS Solenoid Relay Circuit - AutoCodes.com
C146F 2014 Toyota RAV4 Code - Short in ABS Solenoid Relay Circuit

What are the Possible Causes of the DTC C146F 2014 Toyota RAV4?

  • Faulty Skid Control ECU (Brake Actuator Assembly)
  • Skid Control ECU harness is open or shorted
  • Skid Control ECU circuit poor electrical connection

How to Fix the DTC C146F 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C146F 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C146F 2014 Toyota RAV4 code?

Need more information on how to fix the C146F 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C146F 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C146F 2014 Toyota RAV4 Code

1. What does OBDII code C146F mean on a 2014 Toyota RAV4?

Code C146F indicates a "Short in ABS Solenoid Relay Circuit," meaning there’s an electrical issue in the circuit controlling the ABS solenoid relay.

2. What are the symptoms of code C146F on a 2014 Toyota RAV4?

Common symptoms include the ABS warning light turning on, reduced or non-functional ABS, and possibly decreased braking performance.

3. What causes code C146F to appear in a 2014 Toyota RAV4?

This code is typically caused by a short circuit in the ABS solenoid relay, damaged wiring, a faulty ABS solenoid relay, or a malfunctioning ABS control module.

4. Can I still drive my 2014 Toyota RAV4 with code C146F?

While the vehicle may still be drivable, it’s unsafe as the ABS may not function properly, increasing the risk of skidding or losing control during hard braking.

5. How do I diagnose code C146F in a 2014 Toyota RAV4?

Diagnosis involves checking the ABS solenoid relay, inspecting wiring and connectors for damage or shorts, and testing the ABS control module for faults.

6. How do I fix code C146F on a 2014 Toyota RAV4?

Repairs may include replacing the ABS solenoid relay, repairing or replacing damaged wiring, or, in rare cases, replacing the ABS control module.

7. How much does it cost to repair code C146F on a 2014 Toyota RAV4?

Repair costs can range from $100 to $500 depending on whether it’s a simple relay replacement or more extensive wiring or module repairs.

8. Can a dead battery cause code C146F in a 2014 Toyota RAV4?

A dead or weak battery alone is unlikely to cause this code but could exacerbate electrical issues that lead to it, such as voltage irregularities.

9. Will clearing the C146F code fix the problem in a 2014 Toyota RAV4?

Clearing the code will reset the warning temporarily, but the underlying issue must be repaired to prevent the code and symptoms from returning.

10. Can I replace the ABS solenoid relay myself to fix code C146F on a 2014 Toyota RAV4?

If you have basic automotive repair skills and the correct tools, you can replace the relay yourself. However, diagnosing the issue fully is recommended to ensure it’s the root cause.

Discuss the causes and fixes for C146F 2014 Toyota RAV4 OBDII Code

Code C146F 2014 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play