AutoCodesToyota – C146A 2017 Toyota RAV4

C146A 2017 Toyota RAV4 Code - SRR Solenoid Circuit

Quick Answer

The SRR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C146A 2017 Toyota RAV4 indicates SRR Solenoid Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 192
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 18, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C146A 2017 Toyota RAV4 Description

The SRR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. The Skid Control ECU (Brake Actuator Assembly) monitors the SRR Solenoid. The Skid Control ECU (Brake Actuator Assembly) sets the Diagnostic Trouble Code (DTC) when the SRR Solenoid is not to factory specifications.
OBDII Code C146A 2017 Toyota RAV4 - SRR Solenoid Circuit - AutoCodes.com
C146A 2017 Toyota RAV4 Code - SRR Solenoid Circuit

What are the Possible Causes of the DTC C146A 2017 Toyota RAV4?

  • Faulty Skid Control ECU (Brake Actuator Assembly)

How to Fix the DTC C146A 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C146A 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C146A 2017 Toyota RAV4 code?

Need more information on how to fix the C146A 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C146A 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C146A 2017 Toyota RAV4 Code

1. What does the OBDII code C146A mean on a 2017 Toyota RAV4?

C146A indicates an issue with the SRR (Skid Control Rear) solenoid circuit in the anti-lock braking system (ABS).

2. What are the common symptoms of code C146A in a 2017 Toyota RAV4?

Symptoms may include the ABS warning light turning on, reduced braking performance, or the traction control system being disabled.

3. What causes the C146A code to appear in a Toyota RAV4?

Common causes include a faulty SRR solenoid, damaged wiring or connectors in the circuit, or a malfunctioning ABS control module.

4. Can I drive my Toyota RAV4 with the C146A code active?

While the vehicle may still be drivable, braking performance and safety features like ABS and traction control can be compromised, so it’s best to address the issue promptly.

5. How can I diagnose the C146A code in my 2017 Toyota RAV4?

Diagnosis typically involves scanning for codes, inspecting the SRR solenoid and its wiring, and testing the circuit for proper voltage and connectivity.

6. How do I fix the C146A code in a Toyota RAV4?

Repairs may include replacing the SRR solenoid, repairing or replacing damaged wiring, or, in rare cases, replacing the ABS control module.

7. How much does it cost to repair the C146A code on a 2017 Toyota RAV4?

Repair costs vary based on the issue, but replacing a solenoid can range from $100 to $300, while more extensive repairs, like replacing the ABS module, may cost $800 or more.

8. Can a weak battery cause the C146A code in a Toyota RAV4?

A weak or failing battery is unlikely to directly cause this code but could contribute to electrical issues affecting the ABS system.

9. Does clearing the C146A code with a scanner fix the issue?

Clearing the code will remove the warning temporarily, but the underlying issue must be resolved to prevent the code from returning.

10. Is the C146A code specific to the 2017 Toyota RAV4?

While C146A is a standard OBDII code, it is specific to Toyota vehicles and relates to the SRR solenoid circuit in the ABS system.

Discuss the causes and fixes for C146A 2017 Toyota RAV4 OBDII Code

Code C146A 2017 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play