AutoCodes – Toyota – C146A 2014 Toyota RAV4

C146A 2014 Toyota RAV4 Code - SRR Solenoid Circuit

Quick Answer

The SRR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C146A 2014 Toyota RAV4 indicates SRR Solenoid Circuit.
Common causes: Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 261

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 18, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C146A 2014 Toyota RAV4 Description

The SRR Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. The Skid Control ECU (Brake Actuator Assembly) monitors the SRR Solenoid. The Skid Control ECU (Brake Actuator Assembly) sets the Diagnostic Trouble Code (DTC) when the SRR Solenoid is not to factory specifications.

OBDII Code C146A 2014 Toyota RAV4 - SRR Solenoid Circuit - AutoCodes.com — C146A 2014 Toyota RAV4 Code - SRR Solenoid Circuit

What does this mean?

What are the Possible Causes of the DTC C146A 2014 Toyota RAV4?

Faulty Skid Control ECU (Brake Actuator Assembly)

How to Fix the DTC C146A 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C146A 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C146A 2014 Toyota RAV4 code?

Need more information on how to fix the C146A 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C146A 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C146A 2014 Toyota RAV4 Code

1. What does OBDII code C146A in a 2014 Toyota RAV4 indicate?

The OBDII code C146A in a 2014 Toyota RAV4 refers to the SRR Solenoid Circuit, indicating an issue with the solenoid circuit within the RAV4's steering system.

2. What are the common symptoms of OBDII code C146A in a 2014 Toyota RAV4?

Common symptoms of OBDII code C146A in a 2014 Toyota RAV4 may include steering wheel stiffness, difficulty in steering, or the steering wheel not returning to center properly.

3. What are the possible causes of OBDII code C146A in a 2014 Toyota RAV4?

Possible causes of OBDII code C146A in a 2014 Toyota RAV4 include a faulty SRR solenoid, damaged wiring or connectors in the solenoid circuit, or a malfunction in the steering control module.

4. How can I diagnose OBDII code C146A in a 2014 Toyota RAV4?

Diagnosing OBDII code C146A in a 2014 Toyota RAV4 typically involves using a diagnostic scanner to retrieve the code, checking the SRR solenoid and its circuit for any visible damage, and testing the electrical connections for proper voltage and continuity.

5. Can I continue driving my 2014 Toyota RAV4 with OBDII code C146A?

It is not recommended to continue driving your 2014 Toyota RAV4 with OBDII code C146A, as steering issues can compromise your safety on the road. It is best to have the problem diagnosed and repaired as soon as possible.

6. How can I repair OBDII code C146A in a 2014 Toyota RAV4?

Repairing OBDII code C146A in a 2014 Toyota RAV4 may involve replacing the faulty SRR solenoid, repairing or replacing damaged wiring or connectors, or reprogramming the steering control module.

7. Is OBDII code C146A in a 2014 Toyota RAV4 a common issue?

While OBDII code C146A in a 2014 Toyota RAV4 is not as common as some other codes, it can still occur due to various factors like component wear, electrical faults, or software glitches.

8. Can I reset OBDII code C146A in a 2014 Toyota RAV4 using a diagnostic tool?

Yes, you can reset OBDII code C146A in a 2014 Toyota RAV4 using a diagnostic tool. However, it is important to address the underlying issue causing the code before resetting it.

9. How much does it cost to repair OBDII code C146A in a 2014 Toyota RAV4?

The cost to repair OBDII code C146A in a 2014 Toyota RAV4 can vary depending on the specific cause of the issue, the parts needed for repair, and the labor rates of the repair shop. It is recommended to obtain quotes from different mechanics or dealerships.

10. Can a DIY enthusiast fix OBDII code C146A in a 2014 Toyota RAV4?

While some DIY enthusiasts may be able to diagnose and repair OBDII code C146A in a 2014 Toyota RAV4, it is a complex issue related to the steering system. If you are not experienced in handling such repairs, it is best to seek professional help to ensure the problem is fixed correctly.