C145F Chrysler Code - AWD System Temporarily Disabled Overtemperature
Quick Answer
The All Wheel Drive (AWD) Control Module detects an overheat condition due to an excessive difference in speed across the Electronically Controlled Clutch (ECC) from hard driving conditions (Mud, Sand, Snow, 2WD Chassis dynamometer etc.). Common causes include Faulty Electronically Controlled Clutch (ECC) Solenoid, ECC Solenoid harness is open or shorted, ECC Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C145F Chrysler indicates AWD System Temporarily Disabled Overtemperature.
- Common causes
- Common causes include Faulty Electronically Controlled Clutch (ECC) Solenoid, ECC Solenoid harness is open or shorted, ECC Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C145F Chrysler Description
What are the Possible Causes of the DTC C145F Chrysler?
- Faulty Electronically Controlled Clutch (ECC) Solenoid
- ECC Solenoid harness is open or shorted
- ECC Solenoid circuit poor electrical connection
- Faulty All Wheel Drive (AWD) Control Module
How to Fix the DTC C145F Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C145F Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C145F Chrysler code?
Need more information on how to fix the C145F Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C145F Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C145F Chrysler Code
1. What are the common symptoms of OBDII code C145F Chrysler (AWD System Temporarily Disabled Overtemperature)?
- Common symptoms include a warning light on the dashboard indicating "AWD System Temporarily Disabled," limited traction, and possible loss of power to the wheels.
2. What can cause the AWD System Temporarily Disabled Overtemperature code C145F in a Chrysler vehicle?
- This code is typically triggered by overheating in the all-wheel drive (AWD) system due to excessive use or a malfunction in the system components such as the transfer case, differential, or sensors.
3. How serious is the OBDII code C145F Chrysler (AWD System Temporarily Disabled Overtemperature)?
- While the code itself may not cause immediate damage, it is important to address the underlying issue promptly to prevent further damage to the AWD system and ensure safe driving conditions.
4. What should I do if I see the AWD System Temporarily Disabled warning light in my Chrysler vehicle?
- If the warning light comes on, it is recommended to reduce driving speed, avoid harsh acceleration or deceleration, and schedule a diagnostic check with a qualified mechanic to identify and repair the issue.
5. Can I continue driving my Chrysler vehicle with the AWD System Temporarily Disabled Overtemperature code C145F?
- It is not advisable to continue driving with this code active, as it may lead to further damage to the AWD system and compromise vehicle safety. It is best to have the issue diagnosed and repaired promptly.
6. How can I diagnose and repair the OBDII code C145F in my Chrysler vehicle?
- Diagnosing and repairing this code typically involves using a professional OBDII scanner to retrieve the specific fault codes, conducting a visual inspection of the AWD system components, testing sensors, and addressing any overheating issues.
7. Are there any DIY tips for troubleshooting the AWD System Temporarily Disabled Overtemperature code in a Chrysler vehicle?
- While some basic checks like inspecting fluid levels, ensuring proper cooling system operation, and looking for visible damage can be done, it is recommended to seek professional help for accurate diagnosis and repair.
8. Can weather conditions affect the occurrence of the AWD System Temporarily Disabled Overtemperature code?
- Extreme weather conditions, such as driving in high temperatures or towing heavy loads in hot weather, can put additional strain on the AWD system and potentially trigger the overtemperature warning.
9. How much does it typically cost to repair the AWD System Temporarily Disabled Overtemperature code in a Chrysler vehicle?
- The cost of repairs can vary depending on the specific issue causing the code, the extent of damage, and the labor rates in your area. It is best to get a detailed estimate from a qualified mechanic.
10. Will resetting the OBDII code C145F Chrysler (AWD System Temporarily Disabled Overtemperature) make the issue go away?
- Resetting the code may temporarily turn off the warning light, but if the underlying problem is not addressed, the code is likely to reappear. It is essential to diagnose and repair the root cause of the issue.
Discuss the causes and fixes for C145F Chrysler OBDII Code
Code C145F Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
