AutoCodesGeneric – C1444

C1444 Code - Steering Phase 'B' Circuit Short To Ground

Quick Answer

The Anti-Lock Brake System (ABS) Actuator And Electric Unit (Control Unit) monitors the Steering Phase 'B' . Common causes include Faulty Steering Phase 'B', Steering Phase 'B' harness is open or shorted, Steering Phase 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1444 indicates Steering Phase 'B' Circuit Short To Ground.
Common causes
Common causes include Faulty Steering Phase 'B', Steering Phase 'B' harness is open or shorted, Steering Phase 'B' circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,953
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 04, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1444 Description

The Anti-Lock Brake System (ABS) Actuator And Electric Unit (Control Unit) monitors the Steering Phase 'B' . The ABS Actuator And Electric Unit sets the OBDII code when the Steering Phase 'B' is not to factory specifications.
OBDII Code C1444 - Steering Phase 'B' Circuit Short To Ground - AutoCodes.com
C1444 Code - Steering Phase 'B' Circuit Short To Ground

What are the Possible Causes of the DTC C1444?

  • Faulty Steering Phase 'B'
  • Steering Phase 'B' harness is open or shorted
  • Steering Phase 'B' circuit poor electrical connection

How to Fix the DTC C1444?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1444 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1444 code?

Need more information on how to fix the C1444 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1444 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1444 Code

1. What does the OBDII code C1444 mean?

C1444 indicates that the Steering Phase 'B' Circuit has a short to ground, usually related to the steering angle sensor or electronic power steering system.

2. What are the common symptoms of C1444?

Symptoms include a malfunctioning electronic power steering system, a warning light on the dashboard, reduced or no power steering assist, and erratic steering behavior.

3. What causes the C1444 code to appear?

This code is typically caused by damaged wiring, a short circuit in the Steering Phase 'B' Circuit, a faulty steering angle sensor, or a defective power steering control module.

4. How can I diagnose the C1444 code?

Start by inspecting the wiring and connectors for damage or corrosion, check the steering angle sensor for proper function, and test the circuit for continuity and shorts using a multimeter.

5. Can I drive with the C1444 code active?

While the vehicle may still be drivable, reduced power steering assist can make steering difficult and unsafe, especially at low speeds. It’s best to address the issue promptly.

6. How do I fix the C1444 code?

Repairs may include replacing damaged wiring, cleaning or replacing corroded connectors, replacing a faulty steering angle sensor, or reprogramming or replacing the power steering control module.

7. How much does it cost to repair the C1444 code?

Repair costs vary depending on the issue. Replacing wiring or connectors may cost $100–$300, while replacing the steering angle sensor or control module can range from $300–$1,000.

8. Can a blown fuse cause the C1444 code?

Yes, a blown fuse in the power steering or steering angle sensor circuit can cause this code to appear. Check the fuses as part of your diagnosis.

9. Does the C1444 code require reprogramming after repairs?

In some cases, reprogramming the power steering control module or recalibrating the steering angle sensor may be necessary after repairs.

10. What tools are required to troubleshoot the C1444 code?

You’ll need an OBDII scanner, a multimeter for checking continuity and shorts, and potentially specialty tools for steering angle sensor calibration or module reprogramming.

Discuss the causes and fixes for C1444 OBDII Code

Code C1444 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play