C1443 2014 Toyota RAV4 Code - Invalid Data Received from Yaw Rate Sensor
Quick Answer
The Airbag Sensor Assembly has a built-in Yaw Rate and Acceleration Sensor. Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1443 2014 Toyota RAV4 indicates Invalid Data Received from Yaw Rate Sensor.
- Common causes
- Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1443 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC C1443 2014 Toyota RAV4?
- Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly)
- Yaw Rate and Acceleration Sensor harness is open or shorted
- Yaw Rate and Acceleration Sensor circuit poor electrical connection
How to Fix the DTC C1443 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1443 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1443 2014 Toyota RAV4 code?
Need more information on how to fix the C1443 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1443 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1443 2014 Toyota RAV4 Code
1. What does the OBDII code C1443 mean on a 2014 Toyota RAV4?
C1443 indicates "Invalid Data Received from Yaw Rate Sensor," meaning the vehicle's stability control system detected an issue with the yaw rate sensor signal.
2. What are the common symptoms of the C1443 code?
Symptoms may include the ABS, traction control, or stability control warning lights illuminating, and reduced or disabled stability control functionality.
3. What causes the C1443 code to appear on a 2014 Toyota RAV4?
Possible causes include a faulty yaw rate sensor, wiring issues, a poor connection in the sensor circuit, or a malfunctioning ABS control module.
4. Can I still drive my 2014 Toyota RAV4 with the C1443 code active?
While the vehicle may still be drivable, stability control and traction control systems may not function properly, increasing the risk of losing control in certain driving conditions.
5. How do I diagnose the C1443 code?
Diagnosis involves inspecting the yaw rate sensor, checking wiring and connectors for damage, and using a diagnostic scanner to monitor sensor data and verify the fault.
6. Is a faulty yaw rate sensor the only cause of the C1443 code?
No, other potential issues include corroded or damaged wiring, loose connections, or a problem with the ABS control module.
7. How can I fix the C1443 code on my 2014 Toyota RAV4?
Repairs may involve replacing the yaw rate sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ABS control module if necessary.
8. How much does it cost to fix the C1443 code?
Repair costs can vary but typically range from $200 to $600, depending on whether the yaw rate sensor, wiring, or ABS control module needs replacement.
9. Where is the yaw rate sensor located on a 2014 Toyota RAV4?
The yaw rate sensor is usually located near the center of the vehicle under the center console or beneath the seats.
10. Can a weak battery trigger the C1443 code on a Toyota RAV4?
Yes, a weak or failing battery can cause voltage fluctuations that may result in communication errors with the yaw rate sensor.
Discuss the causes and fixes for C1443 2014 Toyota RAV4 OBDII Code
Code C1443 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
