C1440 2013 Toyota RAV4 Code - Steering Angle Sensor Unusual Bank Angle Detected
Quick Answer
If the Skid Control ECU (Brake Actuator Assembly) determines that the vehicle is being driven at a steep bank angle, the Skid Control ECU (Brake Actuator Assembly) stores Diagnostic Trouble Code (DTC) C1440 while VSC operation is temporarily disabled. Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1440 2013 Toyota RAV4 indicates Steering Angle Sensor Unusual Bank Angle Detected.
- Common causes
- Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1440 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC C1440 2013 Toyota RAV4?
- Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly)
- Yaw Rate and Acceleration Sensor harness is open or shorted
- Yaw Rate and Acceleration Sensor circuit poor electrical connection
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1440 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1440 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1440 2013 Toyota RAV4 code?
Need more information on how to fix the C1440 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1440 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1440 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1440 in a 2013 Toyota RAV4?
- The common symptoms of OBDII code C1440 "Steering Angle Sensor Unusual Bank Angle Detected" in a 2013 Toyota RAV4 include the traction control light or ABS light illuminating on the dashboard.
2. What could cause the OBDII code C1440 in a 2013 Toyota RAV4?
- The OBDII code C1440 in a 2013 Toyota RAV4 is typically triggered by a malfunction or misalignment of the steering angle sensor.
3. How can I diagnose the OBDII code C1440 in my 2013 Toyota RAV4?
- Diagnosing the OBDII code C1440 in a 2013 Toyota RAV4 usually involves using a scan tool to read the fault codes and inspecting the steering angle sensor for any issues.
4. Can I continue driving my 2013 Toyota RAV4 with the OBDII code C1440?
- While it may be possible to continue driving your 2013 Toyota RAV4 with the OBDII code C1440, it is recommended to have the issue diagnosed and repaired as soon as possible to avoid potential safety risks.
5. How can I repair the OBDII code C1440 in my 2013 Toyota RAV4?
- Repairing the OBDII code C1440 in a 2013 Toyota RAV4 may involve recalibrating or replacing the steering angle sensor to resolve the unusual bank angle detected.
6. Is it necessary to reset the OBDII code C1440 after repairing it in my 2013 Toyota RAV4?
- Yes, it is recommended to reset the OBDII code C1440 after repairing it in your 2013 Toyota RAV4 to clear the fault code and ensure the issue has been properly addressed.
7. Can extreme driving conditions trigger the OBDII code C1440 in a 2013 Toyota RAV4?
- Extreme driving conditions, such as off-roading or sharp turns, can potentially trigger the OBDII code C1440 in a 2013 Toyota RAV4 if they cause misalignments or malfunctions in the steering angle sensor.
8. How much does it cost to repair the OBDII code C1440 in a 2013 Toyota RAV4?
- The cost to repair the OBDII code C1440 in a 2013 Toyota RAV4 can vary depending on the extent of the issue and whether recalibration or replacement of the steering angle sensor is required.
9. Are there any DIY solutions to fix the OBDII code C1440 in a 2013 Toyota RAV4?
- While some basic diagnosis steps can be done by DIY enthusiasts, recalibrating or replacing the steering angle sensor to fix the OBDII code C1440 in a 2013 Toyota RAV4 is best left to professionals with the necessary tools and expertise.
10. How often does the OBDII code C1440 occur in a 2013 Toyota RAV4?
- The occurrence of the OBDII code C1440 "Steering Angle Sensor Unusual Bank Angle Detected" in a 2013 Toyota RAV4 can vary and is typically influenced by factors like driving habits, road conditions, and the overall condition of the vehicle's steering system.
Discuss the causes and fixes for C1440 2013 Toyota RAV4 OBDII Code
Code C1440 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
