C1439 2015 Toyota RAV4 Code - Steering Angle Sensor Initialization Incomplete
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) acquires a steering sensor zero point every time the ignition switch is turned to ON and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1439 2015 Toyota RAV4 indicates Steering Angle Sensor Initialization Incomplete.
- Common causes
- Common causes include Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted, Steering Angle Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1439 2015 Toyota RAV4 Description
What are the Possible Causes of the DTC C1439 2015 Toyota RAV4?
- Faulty Steering Angle Sensor
- Steering Angle Sensor harness is open or shorted
- Steering Angle Sensor circuit poor electrical connection
- Yaw Rate and Acceleration Sensor (for separate type)
- Yaw Rate and Acceleration Sensor (Airbag sensor assembly) (for built-in type)
How to Fix the DTC C1439 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1439 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1439 2015 Toyota RAV4 code?
Need more information on how to fix the C1439 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1439 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1439 2015 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1439 in a 2015 Toyota RAV4?
- The common symptoms of code C1439 include the ABS warning light staying on, traction control system malfunction, and potential loss of power steering assistance.
2. What does the OBDII code C1439 for a 2015 Toyota RAV4 mean?
- OBDII code C1439 indicates that the steering angle sensor initialization process was incomplete. This can lead to issues with the vehicle's stability control and ABS systems.
3. What are possible causes of the steering angle sensor initialization incomplete error in a 2015 Toyota RAV4?
- Possible causes of this error include a faulty steering angle sensor, damaged wiring or connectors related to the sensor, or issues with the vehicle's electronic stability control system.
4. How can I diagnose the steering angle sensor initialization issue in my 2015 Toyota RAV4?
- Diagnosis typically involves using a diagnostic scanner to retrieve the specific error code, checking the wiring and connectors for any damage, and testing the steering angle sensor's functionality.
5. Can I drive my 2015 Toyota RAV4 with the steering angle sensor initialization incomplete error?
- It is not recommended to drive the vehicle with this error as it can affect the operation of the stability control and ABS systems, potentially compromising safety.
6. How can I reset the steering angle sensor initialization in my 2015 Toyota RAV4?
- Resetting the steering angle sensor initialization usually requires performing a specific calibration or initialization procedure using a professional diagnostic tool or visiting a qualified mechanic.
7. Is it possible to repair the steering angle sensor initialization issue in a 2015 Toyota RAV4 myself?
- While some basic checks like inspecting wiring connections can be done by DIY enthusiasts, recalibrating or replacing the steering angle sensor may require specialized tools and expertise, best left to professionals.
8. Are there any recalls or technical service bulletins related to OBDII code C1439 in a 2015 Toyota RAV4?
- It's advisable to check with Toyota dealerships or online databases for any recalls or technical service bulletins addressing the steering angle sensor initialization issue in the 2015 RAV4.
9. How much does it typically cost to repair the steering angle sensor initialization incomplete error in a 2015 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve expenses for diagnostic labor, parts replacement, and recalibration, potentially ranging from a hundred to several hundred dollars.
10. What are the potential risks of ignoring the steering angle sensor initialization error in my 2015 Toyota RAV4?
- Ignoring the error can lead to compromised stability control and ABS functionality, increasing the risk of losing control of the vehicle in certain driving conditions, posing a safety hazard to the driver and passengers.
Discuss the causes and fixes for C1439 2015 Toyota RAV4 OBDII Code
Code C1439 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
