AutoCodes – Scion – C142B Scion

C142B Scion Code - Motor Power Supply Voltage Circuit

Quick Answer

The Motor Relay and motor fail-safe relay are built into the Brake Actuator Assembly. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C142B Scion indicates Motor Power Supply Voltage Circuit.
Common causes: Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 382

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 30, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C142B Scion Description

The Motor Relay and motor fail-safe relay are built into the Brake Actuator Assembly. During ABS, TRAC, VSC, brake hold, or brake assist operation, the Skid Control ECU (Brake Actuator Assembly) turns on the motor relay to run the pump motor in the Brake Actuator Assembly. When a motor system Diagnostic Trouble Code (DTC) is stored, the motor fail-safe relay cuts the power source supply to the motor relay for fail-safe operation.
This DTC may be stored when the voltage to the motor relay power source is lower than the DTC detection condition due to low output from the battery or alternator.

OBDII Code C142B Scion - Motor Power Supply Voltage Circuit - AutoCodes.com — C142B Scion Code - Motor Power Supply Voltage Circuit

What does this mean?

What are the Possible Causes of the DTC C142B Scion?

Faulty Skid Control ECU (Brake Actuator Assembly)
Skid Control ECU harness is open or shorted
Skid Control ECU circuit poor electrical connection

How to Fix the DTC C142B Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C142B Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C142B Scion code?

Need more information on how to fix the C142B Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C142B Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.