C142A 2014 Toyota RAV4 Code - Master Cylinder Pressure Sensor Internal Malfunction
Quick Answer
The Master Cylinder Pressure Sensor is connected to the Skid Control ECU (Brake Actuator Assembly). Common causes include Faulty Brake Actuator Assembly (Master Cylinder Pressure Sensor), Brake Actuator Assembly harness is open or shorted, Brake Actuator Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C142A 2014 Toyota RAV4 indicates Master Cylinder Pressure Sensor Internal Malfunction.
- Common causes
- Common causes include Faulty Brake Actuator Assembly (Master Cylinder Pressure Sensor), Brake Actuator Assembly harness is open or shorted, Brake Actuator Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C142A 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC C142A 2014 Toyota RAV4?
- Faulty Brake Actuator Assembly (Master Cylinder Pressure Sensor)
- Brake Actuator Assembly harness is open or shorted
- Brake Actuator Assembly circuit poor electrical connection
How to Fix the DTC C142A 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C142A 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C142A 2014 Toyota RAV4 code?
Need more information on how to fix the C142A 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C142A 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C142A 2014 Toyota RAV4 Code
1. What does the OBDII code C142A mean on a 2014 Toyota RAV4?
C142A indicates a "Master Cylinder Pressure Sensor Internal Malfunction," meaning there is an issue with the pressure sensor inside the brake system's master cylinder.
2. What are common symptoms of code C142A in a 2014 Toyota RAV4?
Common symptoms include the ABS warning light turning on, reduced braking performance, and potential loss of advanced braking features like traction control or stability control.
3. What causes code C142A to appear on a 2014 Toyota RAV4?
The code can be triggered by a faulty master cylinder pressure sensor, damaged wiring or connectors, or issues with the ABS control module.
4. Can I drive my 2014 Toyota RAV4 with the C142A code?
While the vehicle may still be drivable, it is not recommended as braking performance and safety features like ABS and traction control may be compromised.
5. How do you diagnose code C142A on a 2014 Toyota RAV4?
Diagnosis involves scanning the ABS system for codes, inspecting the master cylinder pressure sensor, checking the wiring and connectors, and testing the ABS control module.
6. How is the C142A code repaired on a 2014 Toyota RAV4?
Repairs may include replacing the master cylinder pressure sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ABS control module.
7. How much does it cost to fix the C142A code on a 2014 Toyota RAV4?
Repair costs vary but typically range from $200 to $600, depending on whether the sensor, wiring, or ABS module needs replacement.
8. Can a weak battery cause code C142A on a 2014 Toyota RAV4?
While rare, a weak or failing battery can sometimes cause electrical issues that may contribute to this code. Ensure the battery and charging system are in good condition.
9. Does the C142A code require replacing the entire master cylinder?
Not necessarily. In most cases, only the pressure sensor or its wiring needs repair or replacement, unless the entire master cylinder assembly is faulty.
10. How can I prevent the C142A code from recurring on my 2014 Toyota RAV4?
Regular maintenance, including checking the brake system and ensuring electrical connections are clean and secure, can help prevent this issue.
Discuss the causes and fixes for C142A 2014 Toyota RAV4 OBDII Code
Code C142A 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
